Electric motor: Interventions
Try this in What if Switch on levers and see what changes in India by 2036.
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts |
|---|---|---|---|---|---|---|
| Efficiency | Use | Buy a motor one or two efficiency classes higher (IE2 to IE4) | About 80,000 to 145,000 kg CO2e saved over 20 years for a 110 kW motor, against 204 kg extra to make it [3] | Deployed: EU rules require IE3 and IE4 [7] | IE3 is 69% of motors sold in Europe (2021) [2] | Motor buyers, regulators |
| Efficiency | Use | Replace old standard-efficiency motors with IE3 and IE4 (India) | About 5,000 motors replaced under India's programme save 9,150 MWh a year, about 1.8 MWh each (calculated) [9] | Deployed | Historically 90 to 95% of motors sold in India were IE1 or worse [9] | Industry, government |
| Substitute | Components design | Use synchronous reluctance or permanent magnet motors for IE5 | IE5 reluctance motors cost about the same as IE3 induction motors [2] | Deployed | Not reported | Motor makers, buyers |
| Change route | Supply chain | Choose the magnet supply route with the lowest footprint | The magnet supply chain emits about 72 kg CO2e per 100 kW traction motor (64 kg with older data), and the results depend mostly on the supply route [5][6] | Research | Not reported | Magnet makers, motor makers |
| Design | Making | Cut sheet scrap when punching laminations | A 100 kW traction motor of 44.9 kg leaves 19.7 kg of steel sheet scrap, 30% of the factory's material input [5] | Not reported | Not reported | Motor makers |
| Design | End of life | Rewind failed motors with the correct wire and care | Rewinding can cut efficiency by up to 5%; a 2026 Indian trade article says using the right magnet wire size could save 2.38 TWh a year [9] | Deployed | Not reported | Repair shops, users |
as of 2026-11-13
Sources
- Perspectives on Electric Motor Market Transformation for a Net Zero Carbon Economy (de Almeida, Ferreira and Fong, Energies 16, 1248) MDPI, 2023
- Comparative life cycle assessment of electric motors with different efficiency classes: a deep dive into the trade-offs between the life cycle stages in ecodesign context (Auer and Meincke, International Journal of Life Cycle Assessment 23(8), 1590-1608) Springer, 2018, Tables 2 and 3
- Life cycle assessment of electric traction induction machines (Hsieh, Nordelof, Grunditz and Thiringer, International Journal of Life Cycle Assessment 31, 16) Springer, 2026, Tables 1 to 3 and sections 4.4 to 4.6
- Allocating the environmental burdens in coproduction of rare earth elements for EV magnets (Nordelof and Bongards, EVS38) Chalmers University of Technology, 2025, Section 4.3
- Electric Motors European Commission, Energy Efficient Products
- Setting Standards: Key government initiatives to improve motor efficiency Powerline (India trade magazine), 2026