Material Insights · Understanding the Material World

Electric motor: Working

What it is

The product and the job it does, in a short paragraph

An electric motor turns electrical energy into rotation of a shaft, using the magnetic force between current-carrying coils and either more coils or magnets. This node covers one motor of any size, from small fan motors to vehicle traction machines, as classed under the trade heading for electric motors. Generators and speed drives are left to other nodes. The functional unit is one electric motor. Two variants differ most: induction motors, which have no magnets, and permanent magnet motors.

as of 2026-11-13

How it works

How it does its job, step by step in plain words

The fixed part, the stator, holds copper coils. Three-phase alternating current in them makes a magnetic field that rotates around the machine. In an induction motor the rotating field induces current in a rotor made of a cage of aluminium or copper bars, and the rotor is dragged round, always a little slower than the field. In a permanent magnet motor the rotor carries magnets that lock onto the field and turn at exactly its speed. Either way the shaft delivers torque. A drive that changes the frequency sets the speed. The losses, in the windings, the steel core and the bearings, leave as heat, so motors carry a fan or cooling fins.

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Mass of a four-pole cast iron motor, rated 110 kW707kgInduction motor (IE2)2018[3]
Gross weight of a cast iron industrial motor, 37 kW265kgInduction motor (IE3)2024[4]
Efficiency at full load of the 37 kW motor94.5%Induction motor (IE3)2024[4]
Mass of a car traction motor, 100 kW maximum power44.9kgPermanent magnet motor2026[5]
Mass of three car traction induction motors, 100 to 101 kW maximum power59.5kg (lightest; heaviest 71.2)Induction motor2026[5]
Power density of the traction motor2.2kW/kgPermanent magnet motor2026[5]
Power density of the three traction induction motors (1.4 to 1.7)1.7kW/kg (best of three)Induction motor2026[5]
Average lifetime, lower end of the range by rated power12yearsAll2023[2]
Average lifetime, upper end of the range by rated power20yearsAll2023[2]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Induction motorRotor is a cage of aluminium or copper bars with no magnets; mostly steel and copper2023No share of units found; most motors sold in Europe are IE3 [2]
Permanent magnet motorRotor carries Nd(Dy)FeB magnets (1.26 kg in a 100 kW car traction motor); smaller and lighter for the same power2026No share of units found [6][5]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Efficiency cannot reach 100% because resistance, magnetising and friction losses never vanish (37 kW IE3 motor today)Physical10094.5%[4]
Power per kilogram of a traction motor (induction, today's materials and cooling)Engineering– 1.7kW/kg[5]
Power per kilogram of a permanent magnet traction motorEngineering– 2.2kW/kg[5]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on Limited by
  • Ohm's law Resistance in the copper windings turns part of the electricity into heat.

as of 2026-11-13

Sources

  1. Perspectives on Electric Motor Market Transformation for a Net Zero Carbon Economy (de Almeida, Ferreira and Fong, Energies 16, 1248) MDPI, 2023
  2. Comparative life cycle assessment of electric motors with different efficiency classes: a deep dive into the trade-offs between the life cycle stages in ecodesign context (Auer and Meincke, International Journal of Life Cycle Assessment 23(8), 1590-1608) Springer, 2018, Tables 2 and 3
  3. Environmental Product Declaration (EPD): W22 Cast Iron Electric Motor (37kW), EPD-IES-0017771 WEG, registered with EPD International AB, 2024, Environmental indicators table (GWP-total row) and scenario text
  4. Life cycle assessment of electric traction induction machines (Hsieh, Nordelof, Grunditz and Thiringer, International Journal of Life Cycle Assessment 31, 16) Springer, 2026, Tables 1 to 3 and sections 4.4 to 4.6
  5. Allocating the environmental burdens in coproduction of rare earth elements for EV magnets (Nordelof and Bongards, EVS38) Chalmers University of Technology, 2025, Section 4.3