Grain-oriented electrical steel
A thin silicon steel sheet whose crystals are lined up so that transformer cores waste little energy.
Parts and semi-finished goods · No. 78
- Electrical and chemical age
Large power transformer cores are made of this silicon steel, and making one tonne of it emits about 4.25 tonnes of CO2e in one maker's declaration.
Chart: Illustration: Grain-oriented electrical steel
Where it comes from
Chart: Map of where it comes from
Norman Goss filed a patent for grain-oriented silicon steel in 1934, and use began around 1935. A 1974 paper described Nippon Steel's high-permeability HI-B as two to three grades better than conventional steel.
Three things to know
- One declaration puts a tonne of the sheet at 4,250 kg CO2e to make, and the final anneal alone runs for 4 to 6 days.
- One maker's best laser-refined grade loses at most 0.65 W per kg at 1.7 T and 50 Hz, against up to 1.55 W per kg for its conventional range.
- Amorphous cores cut no-load loss by 50 to 70% against this steel, but US amorphous capacity is 45,000 tonnes against about 175,000 tonnes of grain-oriented steel used in distribution transformers.
The journey
- 1 Melt and castSteel scrap and silicon alloys become slabs with about 3% silicon
- 2 RollHot rolled to coils, then cold rolled to 0.2 to 0.35 mm sheet
- 3 AnnealA 4 to 6 day high-temperature anneal grows crystals aligned with the sheet
- 4 Coat and refineInsulating coating, and laser treatment on the best grades
- 5 CoresCut and stacked into transformer cores, used for decades