Industrial air compressor
A machine that squeezes air for tools, controls and processes in factories.
Machinery and tools · No. 49
- Electronic age
Buying a compressor is the small cost: electricity is about 86% of its life cost, and only about a tenth of that power reaches the tools as useful work.
Chart: Illustration: Industrial air compressor
Where it comes from
Chart: Map of where it comes from
A German engineer patented a screw blower in 1878 and Alf Lysholm patented the screw compressor concept in Sweden in 1934. Atlas Copco bought his rights in 1954 and delivered the first stationary screw compressor in 1955.
Three things to know
- Standard air compressors in the EU used an estimated 57.9 TWh of electricity in 2010, and almost 54,000 standard units were sold that year.
- Leaks can waste 20 to 30% of a compressor's output, and a good repair programme can bring that under 10%.
- A variable-speed drive can save up to 35% of energy against a fixed-speed machine that loads and unloads, says one maker.
The journey
- 1 Cast iron and steelCasings, rotors and frame, made in foundries and machine shops
- 2 Motor and coolerA 75 kW electric motor with copper windings, plus aluminium or steel coolers
- 3 PackageAir end, oil separator, cooler, controller and enclosure assembled and tested
- 4 Factory floorRuns for 4,000 to 8,400 hours a year, mostly on electricity
- 5 End of lifeMetal frame and motor recycled; oil collected as waste
Try this in What if Switch on levers and see what changes in India by 2036.