Material Insights · Understanding the Material World

Industrial air compressor: Working

What it is

The product and the job it does, in a short paragraph

An industrial air compressor is a machine that squeezes air to a higher pressure, 4 to 12.5 bar for the reference machine [12], so that factories can power tools, valves, packaging and processes. The functional unit is one 75 kW industrial screw compressor package, with its motor, cooler, separator and controls. The scope is electric rotary screw units; piston compressors, portable engine-driven compressors and gas compressors are left out.

as of 2026-11-16

How it works

How it does its job, step by step in plain words

Two meshing helical rotors turn inside a casing. Air enters at one end, is trapped in the gaps between the rotors and the casing, and is squeezed into a smaller space as the rotors turn. In an oil-injected unit, oil is sprayed in to seal the gaps, cool the air and lubricate the rotors, and is then removed again in a separator. An oil-free unit leaves oil out of the compression chamber, and a centrifugal unit uses a fast impeller instead of rotors. Squeezing air makes heat, and more than 80% of the electrical energy becomes heat that must be cooled away [1]. A fixed-speed machine loads and unloads to follow demand. A variable-speed machine changes the motor speed instead [12].

as of 2026-11-16

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Motor rating of the reference machine75kWVariable-speed screw2022[12]
Free air delivery at 7 bar, lowest to highest42.1 to 225.0l/sVariable-speed screw2022[12]
Mass of the packaged GA 75 VSD iPM990kgVariable-speed screw2022[12]
Mass per kW, calculated from 990 kg and 75 kW13.2kg/kWVariable-speed screw2022[12]
Specific power at full load and 100 psig, single-stage lubricant-injected screw16 to 19kW per 100 cfmFixed-speed oil-injected screw– [1]
Specific power at full load and 100 psig, centrifugal16 to 20kW per 100 cfmOil-free or centrifugal– [1]
Speed range with best efficiency for a variable-speed unit30 to 80% of full speedVariable-speed screw– [1]
Average lifetime of the compressors in the US standard13yearsFixed-speed oil-injected screw2020[11]

as of 2026-11-16

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Fixed-speed oil-injected screwMotor at one speed; the machine loads and unloads to meet demand; oil seals and cools the compression– The majority of industrial air compressors use rotary screws [4]; no share of units found
Variable-speed screwFrequency converter changes motor speed to match demand; adds power electronics2020Variable-speed, oil-free and low-pressure types together held under 5% of the Indian market in 2020 [7]
Oil-free or centrifugalNo oil in the compression chamber, or a high-speed impeller for large flows of oil-free air2020Centrifugal units suit larger quantities of oil-free air [21]; oil-free, variable-speed and low-pressure types together held under 5% of the Indian market in 2020 [7]

as of 2026-11-16

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Compression turns most input energy into heat (share of electrical input that becomes available heat)Physical– 80% or more[1]
Wire-to-work efficiency of the whole system, motor to toolEngineering– 10%[1]
Spread in isentropic efficiency between standard packages (best against worst)Engineering– about 20 to 30percentage points[6]
Leaks as a share of compressor output in a poorly maintained plantEngineering020% of output[2]

as of 2026-11-16

Science it relies on

The science principles it works by or is limited by

Relies on
  • Gas laws Squeezing a gas into less volume raises its pressure and temperature.
  • First law of thermodynamics The shaft work put in leaves as the energy of the compressed air and as heat.
Limited by

as of 2026-11-16

Sources

  1. Improving Compressed Air System Performance: A Sourcebook for Industry (third edition) US Department of Energy and Compressed Air Challenge, 2016
  2. Compressed Air System Leaks (Improving Compressed Air System Performance, Fact Sheet #7, Rev. 1) Compressed Air Challenge, 2026
  3. Industrial Air Compressors: Technical Discussion Paper Australian Government, Department of Industry, Science, Energy and Resources (Energy Rating), 2020
  4. Energy efficiency and industrial compressors IP&E (ipesearch.co.uk), 2014
  5. Development of a Standards and Labeling Program for Air Compressors in India CLASP, with PwC India, 2020
  6. Energy Conservation Program: Energy Conservation Standards for Compressors (final rule, 10 January 2020) US Federal Register, 2020
  7. GA 7-90 VSD iPM oil-injected rotary screw compressors (brochure 2935 0816 48) Atlas Copco, 2022
  8. Ingersoll Rand Inc. Form 10-K for the fiscal year ended 31 December 2021 US Securities and Exchange Commission, 2022