Material Insights · Understanding the Material World

Industrial air compressor: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

No life-cycle study or EPD opened gives a bill of materials by weight for an industrial screw compressor, and the EU Lot 31 study reports (2014, 2017) could not be opened. The masses found are 990 kg for a 75 kW variable-speed package [12] and about 15 kg per kW for a 300 kW unit in ecoinvent [20]. The materials are named from general engineering practice, without amounts. The air end, oil separator, piston compressors, air dryers and receivers are not yet nodes.

as of 2026-11-16

Components

The products inside one unit, with quantity, mass share and cost share

Variant 1 Not stated
MaterialRoleAmount in one unitShare of the unit's mass
Electric motorComponent1–
The 75 kW drive motor [12], with copper windings and a steel and cast iron frame; its own materials are counted in the motor node.
Heat exchangerComponentNot given –
Air and oil coolers take away the heat of compression; count not found.
Rolling bearingComponentNot given –
Bearings carry the two rotors; count not found.
Variant 2 Variable-speed screw
MaterialRoleAmount in one unitShare of the unit's mass
Variable speed driveComponent1–
The frequency converter that sets motor speed, rated for the 75 kW motor [12]; its power modules and other materials are counted in the drive node, whose unit is a 37 kW drive.

as of 2026-11-16

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructuralNot given –
Frame, enclosure, shafts, pipework and cast iron casings. No source opened gives kilograms by material for a compressor; the whole package weighs 990 kg [12].
Al AluminiumFunctionalNot given –
Coolers and some housings; amount not found in any source opened.
Cu CopperFunctionalNot given –
Windings and wiring outside the motor node; amount not found.
Lub Lubricant additivesConsumableNot given –
The additives in the compressor lubricant oil that cools and seals an oil-injected unit; the oil is topped up and changed through life. Amount not found.

as of 2026-11-16

Cost breakdown

The share of the unit's cost in each component or stage

PartShare of costYearSource
Electricity over the life of the compressor (Australian estimate, all industrial air compressors)86%2020[4]
Energy in the yearly cost of buying and running the EU's rotary standard air compressor packages, 2020 estimate80%2020[5]

as of 2026-11-16

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensTechnologySource
Cast and machine the air endThe casing is cast from iron and the two helical rotors are machined to fine tolerances.– –
Fit rotors and bearingsThe rotors are mounted in bearings inside the casing and set to a close clearance.– –
Couple the motorThe electric motor is coupled to the air end, directly or through gears or belts.Electric motors and drives–
Add cooling and separationCoolers, the oil separator, filters and pipework are mounted on the frame.– –
Fit controls and enclosureA controller, and a frequency converter in a variable-speed unit, and a sound-proof enclosure are added.Transformers and power electronics–
TestThe finished package is run and its delivery and power measured; India has adopted ISO 1217 for this as IS/ISO 1217 [7].– [7]

as of 2026-11-16

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies

as of 2026-11-16

Sources

  1. Industrial Air Compressors: Technical Discussion Paper Australian Government, Department of Industry, Science, Energy and Resources (Energy Rating), 2020
  2. Possible ecodesign requirements for standard air compressor packages (working document) European Commission working document, hosted by the Swedish Energy Agency
  3. Development of a Standards and Labeling Program for Air Compressors in India CLASP, with PwC India, 2020
  4. GA 7-90 VSD iPM oil-injected rotary screw compressors (brochure 2935 0816 48) Atlas Copco, 2022
  5. Metals treatment and compressed air supply (ecoinvent forum presentation, Frischknecht and Steiner, ESU-services) ecoinvent forum, 2008