Heat exchanger
A device that moves heat from one fluid to another without mixing them.
Machinery and tools · No. 48
- Electrical and chemical age
A plate heat exchanger of about 80 to 230 kg, mostly stainless and carbon steel, can pass 1 MW of heat between two liquids without letting them mix.
Chart: Illustration: Heat exchanger
Where it comes from
Chart: Map of where it comes from
APV, the firm founded by Richard Seligman, introduced its plate heat exchanger in 1923, the first commercially available type. It helped bring in modern milk pasteurisation. Alfa-Laval introduced its first heat exchanger in 1938, and SWEP began brazed units in 1983.
Three things to know
- Alfa Laval led the plate heat exchanger market with over 16.5% in 2025, and the top five makers together held about 45%.
- In Alfa Laval's declaration, energy is typically under 3% of the environmental impact of making a gasketed unit, so the metal itself matters most.
- Early plate units used milled plates 5 to 10 mm thick; plates in gasketed units are now 0.4 mm thick.
The journey
- 1 SteelStainless steel alloy 304 or 316, with 60 to 90% recycled content
- 2 PlatesStamped from thin sheet, 0.3 to 0.4 mm thick, with a corrugated pattern
- 3 PackStacked with rubber gaskets in a carbon steel frame, or brazed together with copper
- 4 DutyTwo liquids run in alternate channels and swap heat through the plates
- 5 End of lifeMetals recycled; rubber gaskets can be burnt for energy