Heat exchanger: Evolution
Timeline
The milestones of the product, each with a source
| Year | Event |
|---|---|
| 1923 | APV, founded by Richard Seligman, introduces its plate heat exchanger, the first commercially available type [15][33]; it helped bring in modern milk pasteurisation [16]. |
| 1938 | Alfa-Laval introduces its first heat exchanger [14]. |
| 1976 | Alfa Laval's thermal business in Lund starts building an international production centre for plate heat exchangers [14]. |
| 1983 | SWEP starts as a specialist in brazed plate heat exchangers [17]. |
| 2003 | Alfa Laval launches AlfaNova, a new type of plate heat exchanger based on its own brazing method [14]. |
| 2005 | Alfa Laval acquires Packinox, a leader in large welded plate heat exchangers for oil, gas and refining [14]. |
| 2025 | Alfa Laval reports up to 60% lower emissions on five TL10 gasketed units for a Helsinki hospital, using low-emission steel [21]. |
| 2026 | India notifies the Indian Boiler Regulations, 2026, replacing the 1950 regulations [24]. |
as of 2026-11-17
Lineage
The products and technologies it evolved from and into
Evolved from- HX Heat exchangers and pinch integration The twin technology page covers the working principle, pinch analysis and the early history; this page covers the plate unit as a product.
as of 2026-11-17
Recipe changes
How what it is made of changed over time, and what drove each change
| Change | From | To | Driver | Source |
|---|---|---|---|---|
| Plate thickness and forming | Milled plates 5 to 10 mm thick | Stamped plates 0.4 mm thick | Thin pressed plates cut the metal per unit of heat surface and give a corrugated pattern | [25][29] |
| Joining | Rubber gaskets and a frame | Copper-brazed or welded plate packs | Gaskets and their fixings limit the pressure and temperature of plate-and-frame units | [29] |
| Steel source | Average-emission stainless and carbon steel | Low-emission steel (SSAB Zero, Outokumpu Circle Green) | Up to 60% lower emissions on the delivered unit against average material alternatives, per the maker | [21] |
as of 2026-11-17
What could improve it next
Directions for improvement, today's value and the limit
| Direction | Metric | Today | Limit | Unit | Source |
|---|---|---|---|---|---|
| Lower-emission steel | Emissions of the delivered unit against average material alternatives | up to 60 lower (five TL10 units, 2025) | The stainless steel itself up to 93 lower than the industry average | % | [21] |
| Closer approach temperature | Temperature approach between the liquids | as close as 1 | 0, set by the second law | F | [6] |
| Right-sized pressure drop | Purchase cost saved by designing for 50 kPa instead of 20 kPa | up to 10 | Pumping cost rises with pressure drop | % | [8] |
| Thinner plates | Plate thickness | 0.4 (gasketed), 0.3 (brazed) | Not found | mm | [29] |
as of 2026-11-17
Sources
- Gasketed plate heat exchangers: GPHE vs shell-and-tube Alfa Laval
- Save now, save later: what is the ideal pressure drop to specify for gasketed plate heat exchangers in HVAC applications Alfa Laval
- History of Alfa Laval Alfa Laval
- Seligman's plate heat exchanger (museum object record) Science Museum Group
- Richard Seligman Society of Chemical Industry
- Who we are SWEP (Dover)
- Collaborative innovation cuts heat exchanger carbon footprint by 60 percent for hospital in Helsinki Alfa Laval, 2025
- Indian Boiler Regulations, 2026: India Introduces a New Regulatory Framework for Boilers King Stubb & Kasiva (law firm article), 2026
- Gasketed plate heat exchangers (leaflet) Alfa Laval
- Plate Heat Exchangers and Their Types of Construction (Encyclopedia entry adapted from Energies 16(13), 4976) MDPI, Arsenyeva, Tovazhnyanskyy, Kapustenko, Klemes and Varbanov, 2023
- SPX Flow introduces Plate Heat Exchanger FastFrame Dairy Industries International, 2023