Heat exchanger: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Masses are calculated by scaling four published units linearly with duty to 1 MW: gasketed Alfa Laval units of 500 kW (100.9 kg) and about 1,163 kW (266 kg) [5][31], and brazed units of 900 kW (ACV, 75.8 kg empty) and 800 kW (Alfa Laval, 65.9 kg) [4][32]. Duty depends on temperatures and pressure drop, so the figures are rough. Pumps, pipes and insulation are outside the unit. Rubber gaskets and the rival exchanger types are not yet nodes.
as of 2026-11-17
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Gasketed| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| St Steel | Structural | 201.8 kgrange 201.8 to 228.7 kg | – | 75% |
| Estimate, calculated. Whole unit mass of Alfa Laval's 500 kW T5-BFG-75M (100.9 kg) scaled linearly to 1 MW [5]; the high value scales the T8-BFG-63M (266 kg at about 1,163 kW) the same way [31]. It is an upper bound for steel, because no source splits out gaskets and paint. Plates are mostly stainless steel alloy 304 or 316 (about 80 to 85% of plate volume) and the frame is carbon steel [1]. Recycled content of those stainless alloys is typically 60 to 90%, and 75 is the midpoint [1]. | ||||
| EPDM EPDM | Functional | Not given | – | – |
| Nitrile and EPDM are the most used gasket rubbers [1]. No source gives the gasket mass of a unit. | ||||
| Ni Nickel | Functional | Not given | – | – |
| Nickel is an alloying element of stainless steel 304 and 316 and is counted in the steel row. Nickel alloys are also used for some plates [1]. | ||||
| Cr Chromium | Functional | Not given | – | – |
| Chromium is the alloying element that makes stainless steel stainless. It is counted in the steel row, and some frame parts use chromium steel [1]. | ||||
| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| St Steel | Structural | 84.2 kgrange 82.4 to 84.2 kg | – | 75% |
| Estimate, calculated. Empty weight of ACV's 900 kW brazed unit (75.8 kg) scaled linearly to 1 MW [4]; the low value scales Alfa Laval's CB200-80M (65.9 kg at 800 kW) the same way [32]. It is the whole unit mass, so an upper bound for steel, because the copper brazing is not weighed in either source. Recycled content as for the gasketed variant [1]. | ||||
| Cu Copper | Functional | Not given | – | – |
| Copper is the most common brazing material, with nickel used where copper is unsuitable [29]. The sheet lists the brazing as copper but gives no weight [4]. | ||||
as of 2026-11-17
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Source |
|---|---|---|
| Stamp the plates | Plates are made by stamping thin sheet into a corrugated pattern; stamped plates for plate-and-frame units reach 0.4 mm, and brazed units 0.3 mm [29]. | [29] |
| Fit the gaskets (gasketed variant) | A rubber gasket is fixed to each plate to seal the channels and send each liquid into alternate channels [1][29]. | [1][29] |
| Stack the pack in a frame (gasketed variant) | Plates are stacked with opposing patterns between a frame and a pressure plate, normally made of carbon steel [1]. | [1] |
| Braze the stack (brazed variant) | The stacked plates, with copper as the usual filler, go through heat treatment in a vacuum oven that joins them into one block [29]. | [29] |
as of 2026-11-17
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- SS Stainless steel The plates are stainless steel alloy 304 or 316 [1]. The share of the unit's mass that is stainless is not given.
as of 2026-11-17
Sources
- Climate profile declaration: Alfa Laval gasketed plate heat exchangers T15, T10 and T6 Alfa Laval, 2023
- 900kW Brazed plate heat exchanger kit (ACV PHEX spec sheet) ACV
- T5-BFG-75M, product page Alfa Laval
- Plate Heat Exchangers and Their Types of Construction (Encyclopedia entry adapted from Energies 16(13), 4976) MDPI, Arsenyeva, Tovazhnyanskyy, Kapustenko, Klemes and Varbanov, 2023
- T8-BFG-63M, product page Alfa Laval
- CB200-80M, product page Alfa Laval