Material Insights · Understanding the Material World

Lift (elevator)

A car that carries people and goods between the floors of a building.

Machinery and tools · No. 46

  • Steam and steel
Machinery and tools · Product

A lift weighs about 2.5 tonnes, two thirds of it steel, and more than half its carbon is emitted before it carries anyone.

Chart: Illustration: Lift (elevator)

Where it comes from

Chart: Map of where it comes from

Elisha Otis installed the first passenger elevator at the E. V. Haughwout store in New York in 1857. KONE's MonoSpace removed the machine room in 1996, and Otis introduced flat belts in 2000.

Three things to know
  1. Three makers' lifts of 630 kg for five stops each weigh 2,550 to 2,670 kg, and steel and concrete or glass make up about 90% to 95% of it.
  2. Making the lift gives 47% to 57% of its 25-year emissions in the declarations of KONE, Otis and TK Elevator; electricity and maintenance give most of the rest.
  3. Standby, not travel, uses about 80% of a lift's electricity in a Swiss study of 33 lifts, so idle time matters more than speed.
The journey
  1. 1 Steel and ironSteel for the car, rails and frames; cast iron for machine parts; about two thirds of the lift by mass
  2. 2 Concrete and glassConcrete and glass, about a quarter of the mass
  3. 3 Machine and controllerA gearless traction motor, drive and control electronics built at specialist plants
  4. 4 Shaft installationRails, ropes or belts, car and doors fitted on site, building by building
  5. 5 25 years of serviceElectricity, maintenance visits and replaced parts make up a third to two fifths of the footprint
  6. 6 RecyclingMetals are recycled; about a third of the mass is assumed to be disposed of

Try this in What if Switch on levers and see what changes in India by 2036.

Go deeper pick a tab to open it in full