Material Insights · Understanding the Material World

Lift (elevator): Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

The composition is the KONE MonoSpace 4 DX EPD (2024): 630 kg, 1.0 m/s, five stops, 12 m travel, 25 years, about 2,550 kg [1]. Otis Gen2 Life (2,609 kg, 11 m) and TK synergy 100 (about 2,667 kg calculated, 12.25 m; EPD expired 2022) give the ranges [2][3]. The functional unit has ten storeys, so it has more rail, rope and cable; the EPDs are not scaled. Plastics, electronics, doors and lubricants are in no node.

as of 2026-11-17

Components

The products inside one unit, with quantity, mass share and cost share

MaterialRoleAmount in one unitShare of the unit's mass
Electric motorComponentNot given –
One gearless traction machine hoists the car [5]; quantity is left empty because its steel and copper are already inside the ferrous and non-ferrous totals below, to avoid double counting.
Printed circuit boardComponentNot given –
Control units and printed wiring boards are in the electronics line, 47.6 kg in the KONE unit and not in any material below [1][4].
Insulated power cableComponentNot given –
Cables are listed under electronics and electrical equipment, not under the metals, in the KONE EPDs [4].

as of 2026-11-17

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant Traction
MaterialRoleAmount in one unitShare of the unit's mass
St SteelStructural1700.9 kgrange 1659 to 1824.1 kg 66.7%
Ferrous metals (steel and cast iron) for car, frame, rails, machine parts and ropes in the KONE five-stop reference unit; low is Otis Gen2 Life, high is TK synergy 100. Not scaled to ten storeys [1][2][3].
Agg Sand & gravelFunctional714 kgrange 559.3 to 804 kg 28%
Inorganic materials (concrete and glass), as declared for the five-stop unit; the cement share is not separated, so all is put against sand and gravel to avoid double counting. Low is TK, high is Otis [1][2][3].
Al AluminiumStructural21.9 kg0.9%
Calculated: the KONE MonoSpace 4 DX EPD gives 42.6 kg of non-ferrous metals with no split. The KONE MonoSpace 700 EPD (2019, a 1,600 kg five-stop lift) lists 39 kg aluminium and 37 kg copper as its non-ferrous metals, so aluminium is 42.6 x 39 / 76 = 21.9 kg. An estimate from another model [1][4].
Cu CopperFunctional20.7 kg0.8%
Calculated from the same split: 42.6 x 37 / 76 = 20.7 kg; copper in cables and electronics is outside this figure. An estimate from another model [1][4].

as of 2026-11-17

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
Make modules at specialist sitesThe elevator modules (machine, controller, car, doors, rails and ropes) are manufactured at specific sites in different parts of the world.[1]
Ship to the buildingModules travel to the building site (module A4 in the declaration, 511 kg CO2e for the KONE unit).[1]
Install in the shaftInstalling the lift in the building uses electricity and makes packaging waste (module A5, 772 kg CO2e).[1]
Maintain and replace partsMaintenance over 25 years includes predictive replacement of the necessary parts (module B2, 2,560 kg CO2e).[1]

as of 2026-11-17

Technologies inside it

The technologies inside the product, with how much of each per unit

Embodies

as of 2026-11-17

Sources

  1. KONE MonoSpace 4 DX (630 kg rated load), EPD-IES-0018041 The International EPD System (EPD owner: KONE Corporation), 2024
  2. OTIS Gen2 Life, S-P-01061 The International EPD System (EPD owner: Otis Elevator Company), 2018
  3. synergy 100, S-P-01639 (published 2019, revised 2021, valid until 2022) The International EPD System (EPD of TK Elevator), 2019
  4. KONE MonoSpace 700, KONE MonoSpace 700 DX, RTS_32_19 Building Information Foundation RTS (EPD of KONE), 2019
  5. KONE MonoSpace 4 DX booklet KONE, 2024
  6. Best-in-class energy efficiency KONE