Material Insights · Understanding the Material World

Lift (elevator): Working

What it is

The product and the job it does, in a short paragraph

A passenger lift (elevator) is a car that runs in a shaft and carries people between the floors of a building, hung on ropes or belts and balanced by a counterweight. The functional unit is one eight-person lift of 630 kg rated load for a ten-storey building. The makers' declarations used here describe the same lift serving five stops, so their figures are for that reference unit [1][2][3]. The scope is new electric traction lifts under HS 8428.10.

as of 2026-11-17

How it works

How it does its job, step by step in plain words

A drive controller feeds an electric motor, the traction machine, which turns a sheave (a grooved wheel). Ropes with a high-tensile steel core and a polyurethane coating pass over the sheave and join the car to a counterweight. Friction between sheave and rope moves the car up or down the guide rails [5]. The counterweight balances the car and part of its load, so the motor supplies only the imbalance. Doors, landing buttons and a control system call the car, level it with the floor and stop it. Safety brakes grip the rails if the car overspeeds, a device described in the twin technology page. EN 81-20 sets the safety rules for passenger lifts with traction or hydraulic drive [7].

as of 2026-11-17

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Rated load, eight persons630kgTraction2024[6]
Car width by depth for 8 persons1,100 by 1,400mmTraction2024[6]
Rated speed, base models1m/sTraction2024[5]
Maximum travel, KONE MonoSpace 4 DX at 1.0 m/s (enough for ten storeys)40mTraction2024[5][6]
Maximum travel at 1.6 to 1.75 m/s75mTraction2024[6]
Total mass of the lift, KONE five-stop reference unit2550kgTraction2024[1]
Electricity use, usage category 2479kWh per yearTraction2024[1]
Reference service life used in EPDs25yearsTraction2024[1][2][3]

as of 2026-11-17

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
TractionCar on ropes or belts over a motor-driven sheave with a counterweight; the type of every EPD reference unit used here2024[1][2][3]

as of 2026-11-17. Hydraulic lifts, where a piston lifts the car, fall under the same HS code, but no hydraulic lift EPD was found (Otis lists none among its declarations [29]), so they have no bill of materials or footprint in this file.

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Raising the 630 kg rated load 40 m takes at least 247 kJ (0.069 kWh) a trip, calculated as mass x 9.81 m/s2 x height; the counterweight and motor losses change the real figurePhysical0.069– kWh per trip[5][6]
Steel ropes limit travel height; KONE said in 2013 its carbon fibre UltraRope could allow 1 km, twice the distance then feasible (today calculated from that)Engineering1000500m[24]
Standby electricity, about 80% of the total in a Swiss study of 33 elevatorsEngineering– 80% of lift electricity[21]
Maximum travel of a base MonoSpace 4 DX at 1.0 m/sEngineering4040m[5]

as of 2026-11-17

Science it relies on

The science principles it works by or is limited by

Relies on Limited by

as of 2026-11-17

Sources

  1. KONE MonoSpace 4 DX (630 kg rated load), EPD-IES-0018041 The International EPD System (EPD owner: KONE Corporation), 2024
  2. OTIS Gen2 Life, S-P-01061 The International EPD System (EPD owner: Otis Elevator Company), 2018
  3. synergy 100, S-P-01639 (published 2019, revised 2021, valid until 2022) The International EPD System (EPD of TK Elevator), 2019
  4. KONE MonoSpace 4 DX booklet KONE, 2024
  5. Planning Guide: KONE MonoSpace 4 DX Core and Pro, 300 and 500 DX KONE, 2024
  6. EN 81-20:2014 Safety rules for the construction and installation of lifts, Part 20: Passenger and goods passenger lifts CEN (listing by Genorma), 2014
  7. Energy Efficiency of Elevators Elevator World
  8. New KONE UltraRope elevator hoisting technology enables the next big leap in high-rise building design KONE, 2013