Passenger car: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Masses and materials are for a US midsize sedan in a 2022 Argonne study, current technology [4]. Material amounts are calculated from its material shares less the engine, motor, battery, tyres and glass, which have their own pages, using the study's own make-up of those parts. Assumptions: rubber outside the tyres is counted as EPDM, and the study's tyre row is read as steel and rubber. Battery kWh come from a 2024 Argonne study. Not yet nodes: transmission, inverter, pack housing, seats, wiring and exhaust.
as of 2026-11-13
Components
The products inside one unit, with quantity, mass share and cost share
Variant 1 Petrol| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Passenger car tyre | Component | 4 | 1.35% |
| Four tyres; the study's wheels group is half wheels and half tyres by mass, so the tyres are about 18.9 kg (calculated) [4]. The tyre page uses 8.6 kg a tyre, so this share is low; the spare is not counted | |||
| Internal combustion engine | Component | 1 | 7.5% |
| The engine is 54% of the powertrain group (13.8% of the car), about 104.5 kg (calculated); the fuel tank, exhaust, powertrain wiring and cooling and the gearbox stay in the materials [4] | |||
| Lead-acid battery | Component | 1 | 1.3% |
| The 12 V battery, 1.3% of the car, about 18.2 kg (calculated); the study says the 12-V battery is a lead-acid battery [4] | |||
| Flat glass sheet | Component | Not given | 2% |
| Glass is 2% of the car without its battery, about 27.7 kg (calculated) [4]; the source gives no area in m2 | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Passenger car tyre | Component | 4 | 1.3% |
| Four tyres; the study's wheels group is half wheels and half tyres by mass, so the tyres are about 19.4 kg (calculated) [4]. The tyre page uses 8.6 kg a tyre, so this share is low; the spare is not counted | |||
| Internal combustion engine | Component | 1 | 10.1% |
| The engine is 54% of the powertrain group (18.7% of the car), about 150.5 kg (calculated); the fuel tank, exhaust, powertrain wiring and cooling and the gearbox stay in the materials [4] | |||
| Lead-acid battery | Component | 1 | 1.3% |
| The 12 V battery, 1.3% of the car, about 19.4 kg (calculated); the study says the 12-V battery is a lead-acid battery [4] | |||
| Flat glass sheet | Component | Not given | 2% |
| Glass is 2% of the car without its battery, about 29.4 kg (calculated) [4]; the source gives no area in m2 | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Passenger car tyre | Component | 4 | 1.3% |
| Four tyres; the study's wheels group is half wheels and half tyres by mass, so the tyres are about 19.1 kg (calculated) [4]. The tyre page uses 8.6 kg a tyre, so this share is low; the spare is not counted | |||
| Lithium-ion battery | Component | 1.1 | 2% |
| Quantity in kWh: a 1.1 kWh traction battery in the 2022 Argonne car [5]; mass share 2.0% (about 29.3 kg) from the midsize sedan study, which uses NMC111 cells [4] | |||
| Internal combustion engine | Component | 1 | 5.7% |
| The engine is 54% of the powertrain group (10.6% of the car), about 84.0 kg (calculated); the fuel tank, exhaust, powertrain wiring and cooling and the gearbox stay in the materials [4] | |||
| Electric motor | Component | 1 | 8.9% |
| The study's group of traction motor and other electric machines and control, about 130.6 kg (calculated), includes the controls; the inverter is listed in new_products [4] | |||
| Flat glass sheet | Component | Not given | 2% |
| Glass is 2% of the car without its battery, about 28.8 kg (calculated) [4]; the source gives no area in m2 | |||
| Material | Role | Amount in one unit | Share of the unit's mass | Share of cost |
|---|---|---|---|---|
| Lithium-ion battery | Component | 77.4 | 24.8% | 41% |
| Quantity in kWh: 77.4 kWh in the 2022 Argonne car [5]; mass share 24.8%, about 407.2 kg (calculated), for the 300-mile midsize sedan [4]; cost share for a US midsize car, $9,929 of a manufacturing cost of about $24,263 (calculated, see cost breakdown) [24] | ||||
| Passenger car tyre | Component | 4 | 1.15% | – |
| Four tyres; the study's wheels group is half wheels and half tyres by mass, so the tyres are about 18.9 kg (calculated) [4]. The tyre page uses 8.6 kg a tyre, so this share is low; the spare is not counted | ||||
| Electric motor | Component | 1 | 5.1% | – |
| The study's group of traction motor and other electric machines and control, about 83.7 kg (calculated), includes the controls; the inverter is listed in new_products [4] | ||||
| Flat glass sheet | Component | Not given | 2.3% | – |
| Glass is 3% of the car without its battery, about 37.0 kg (calculated) [4]; the source gives no area in m2 | ||||
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Petrol| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 806 kg | 57.5% |
| Steel and cast iron of the body, chassis, gearbox, exhaust and the rest of the car outside the linked components, calculated [4] | |||
| Al Aluminium | Structural | 134 kg | 9.6% |
| Cast and wrought aluminium of wheels, body parts, gearbox and housings outside the engine and motor, calculated [4] | |||
| EPDM EPDM | Functional | 55 kg | 3.9% |
| EPDM as 7% of the average plastic (about 14.0 kg) plus the study's rubber outside the tyres (about 40.6 kg); the study does not name that rubber, and counting it as EPDM, the usual rubber of seals and hoses, is an assumption [4] | |||
| PU Polyurethanes (MDI, TDI, polyols) | Structural | 48 kg | 3.4% |
| Polyurethane foams (flexible and rigid), 24% of the average plastic, calculated [4] | |||
| PP Polypropylene | Structural | 36 kg | 2.6% |
| Polypropylene, 18% of the study's average plastic, calculated [4] | |||
| PVC PVC | Structural | 28 kg | 2% |
| PVC, 14% of the average plastic, calculated [4] | |||
| Cu Copper | Functional | 26 kg | 1.8% |
| Copper wiring and windings outside the motor, calculated [4] | |||
| EPX Epoxy resins | Structural | 22 kg | 1.6% |
| Liquid epoxy, 11% of the average plastic, calculated [4] | |||
| ABS ABS | Structural | 16 kg | 1.1% |
| ABS, 8% of the average plastic, calculated [4] | |||
| PA Nylon (PA6, PA66) | Structural | 16 kg | 1.1% |
| Nylon 6 and 66, 8% of the average plastic, calculated [4] | |||
| PC Polycarbonate | Structural | 8 kg | 0.6% |
| Polycarbonate, 4% of the average plastic, calculated [4] | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 825 kg | 55.3% |
| Steel and cast iron of the body, chassis, gearbox, exhaust and the rest of the car outside the linked components, calculated [4] | |||
| Al Aluminium | Structural | 140 kg | 9.4% |
| Cast and wrought aluminium of wheels, body parts, gearbox and housings outside the engine and motor, calculated [4] | |||
| EPDM EPDM | Functional | 58 kg | 3.9% |
| EPDM as 7% of the average plastic (about 14.8 kg) plus the study's rubber outside the tyres (about 42.8 kg); the study does not name that rubber, and counting it as EPDM, the usual rubber of seals and hoses, is an assumption [4] | |||
| PU Polyurethanes (MDI, TDI, polyols) | Structural | 51 kg | 3.4% |
| Polyurethane foams (flexible and rigid), 24% of the average plastic, calculated [4] | |||
| Cu Copper | Functional | 41 kg | 2.8% |
| Copper wiring and windings outside the motor, calculated [4] | |||
| PP Polypropylene | Structural | 38 kg | 2.5% |
| Polypropylene, 18% of the study's average plastic, calculated [4] | |||
| PVC PVC | Structural | 30 kg | 2% |
| PVC, 14% of the average plastic, calculated [4] | |||
| EPX Epoxy resins | Structural | 23 kg | 1.6% |
| Liquid epoxy, 11% of the average plastic, calculated [4] | |||
| ABS ABS | Structural | 17 kg | 1.1% |
| ABS, 8% of the average plastic, calculated [4] | |||
| PA Nylon (PA6, PA66) | Structural | 17 kg | 1.1% |
| Nylon 6 and 66, 8% of the average plastic, calculated [4] | |||
| PC Polycarbonate | Structural | 8 kg | 0.6% |
| Polycarbonate, 4% of the average plastic, calculated [4] | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 815 kg | 55.6% |
| Steel and cast iron of the body, chassis, gearbox, exhaust and the rest of the car outside the linked components, calculated [4] | |||
| Al Aluminium | Structural | 103 kg | 7% |
| Cast and wrought aluminium of wheels, body parts, gearbox and housings outside the engine and motor, calculated [4] | |||
| PU Polyurethanes (MDI, TDI, polyols) | Structural | 43 kg | 3% |
| Polyurethane foams (flexible and rigid), 24% of the average plastic, calculated [4] | |||
| EPDM EPDM | Functional | 41 kg | 2.8% |
| EPDM as 7% of the average plastic (about 12.7 kg) plus the study's rubber outside the tyres (about 28.7 kg); the study does not name that rubber, and counting it as EPDM, the usual rubber of seals and hoses, is an assumption [4] | |||
| PP Polypropylene | Structural | 33 kg | 2.2% |
| Polypropylene, 18% of the study's average plastic, calculated [4] | |||
| PVC PVC | Structural | 25 kg | 1.7% |
| PVC, 14% of the average plastic, calculated [4] | |||
| EPX Epoxy resins | Structural | 20 kg | 1.4% |
| Liquid epoxy, 11% of the average plastic, calculated [4] | |||
| Cu Copper | Functional | 19 kg | 1.3% |
| Copper wiring and windings outside the motor, calculated [4] | |||
| ABS ABS | Structural | 14 kg | 1% |
| ABS, 8% of the average plastic, calculated [4] | |||
| PA Nylon (PA6, PA66) | Structural | 14 kg | 1% |
| Nylon 6 and 66, 8% of the average plastic, calculated [4] | |||
| PC Polycarbonate | Structural | 7 kg | 0.5% |
| Polycarbonate, 4% of the average plastic, calculated [4] | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 742 kg | 45.2% |
| Steel and cast iron of the body, chassis, gearbox, exhaust and the rest of the car outside the linked components, calculated [4] | |||
| Al Aluminium | Structural | 93 kg | 5.7% |
| Cast and wrought aluminium of wheels, body parts, gearbox and housings outside the engine and motor, calculated [4] | |||
| EPDM EPDM | Functional | 50 kg | 3% |
| EPDM as 7% of the average plastic (about 12.8 kg) plus the study's rubber outside the tyres (about 36.7 kg); the study does not name that rubber, and counting it as EPDM, the usual rubber of seals and hoses, is an assumption [4] | |||
| PU Polyurethanes (MDI, TDI, polyols) | Structural | 44 kg | 2.7% |
| Polyurethane foams (flexible and rigid), 24% of the average plastic, calculated [4] | |||
| PP Polypropylene | Structural | 33 kg | 2% |
| Polypropylene, 18% of the study's average plastic, calculated [4] | |||
| Cu Copper | Functional | 26 kg | 1.6% |
| Copper wiring and windings outside the motor, calculated [4] | |||
| PVC PVC | Structural | 26 kg | 1.6% |
| PVC, 14% of the average plastic, calculated [4] | |||
| EPX Epoxy resins | Structural | 20 kg | 1.2% |
| Liquid epoxy, 11% of the average plastic, calculated [4] | |||
| ABS ABS | Structural | 15 kg | 0.9% |
| ABS, 8% of the average plastic, calculated [4] | |||
| PA Nylon (PA6, PA66) | Structural | 15 kg | 0.9% |
| Nylon 6 and 66, 8% of the average plastic, calculated [4] | |||
| PC Polycarbonate | Structural | 7 kg | 0.4% |
| Polycarbonate, 4% of the average plastic, calculated [4] | |||
as of 2026-11-13
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Battery pack, share of manufacturing cost of a US midsize car ($9,929 of about $24,263, calculated as the $36,394 purchase cost divided by the 1.5 retail price equivalent; the report does not say whether the battery cost is before the mark-up, and this check takes it to be) | 41% | Battery electric | 2025 | [24] |
| Battery cells, share of vehicle cost in certain segments in India; cells are entirely imported | 35 to 40 | Battery electric | 2025 | [26] |
as of 2026-11-13
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Pressing | Large presses stamp the body, door and roof panels [29] | – | [29] |
| Welding | Robots heat and fuse the pressed parts into the body shape [29] | Industrial robot | [29] |
| Painting | Water-based paint is applied in four successive coats [29] | – | [29] |
| Final assembly | The painted body rides on a conveyor moving at a constant speed while parts, the engine or the battery and motor, and the tyres are fitted [29] | Moving assembly line | [29] |
| Inspection | People and machines check each finished vehicle in detail [29] | – | [29] |
as of 2026-11-13
Technologies used to make it
The technologies used to make it, at which step
Made with- AL Moving assembly line Final assembly on a moving conveyor Ford created a moving assembly line by the end of 1913 [31]
- Rbt Industrial robot Welding the pressed body parts Robots heat and fuse the parts into the body [29]
- Wld Arc welding Joining body parts by heat and fusion The source says robots heat and fuse the parts without naming the welding method, so arc welding is the closest node [29]
as of 2026-11-13
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies 5- ICV Combustion road vehicles The petrol, diesel and hybrid cars carry a combustion engine.
- EV Electric and hybrid vehicles 77.4 kWh of battery per battery electric car (US, 2022) Electric drive with a traction battery [5]
- LFP Lithium iron phosphate batteries Lithium iron phosphate cells were over 55% of EV batteries deployed worldwide in 2025 [11]
- NMC Nickel-rich lithium-ion batteries Nickel-rich cells are the other main chemistry; the Argonne car models use NMC111 cells [4]
- Rgn Regenerative braking and motion recovery Electric cars use regenerative braking to recover energy typically wasted in braking [37]
as of 2026-11-13
Sources
- Cradle-to-Grave Lifecycle Analysis of U.S. Light-Duty Vehicle-Fuel Pathways: A Greenhouse Gas Emissions and Economic Assessment of Current (2020) and Future (2030-2035) Technologies Argonne National Laboratory (ANL-22/27), 2022, Tables 26, 29, 31, 33, 39, 48; sections 6 and 9
- Comprehensive Cradle to Grave Life Cycle Analysis of On-Road Vehicles in the United States based on GREET Argonne National Laboratory (SAE Technical Paper 2024-01-2830), copy on OSTI, 2024, Tables A.1, A.7, A.9, A.10
- Global EV Outlook 2026: Electric vehicle batteries International Energy Agency, 2026
- 2025 Incremental Purchase Cost Methodology and Results for Clean Vehicles U.S. Department of Energy, Vehicle Technologies Office, 2025, Tables 4, 5, 6
- 70% Foreign-Made: India's EV Dream Stuck in Import Gridlock Autocar Professional (ICRA Research), 2025
- From vehicle planning and development to production Toyota Auto Body Co., Ltd., 2026
- Ford's Model T: A Car for the Great Multitude The Henry Ford, 2015
- Where the Energy Goes: Electric Cars US DOE and US EPA (fueleconomy.gov), 2025