PET bottle: Footprint
Raw materials in one unit
Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions
| Variant | Material | Amount (kg) |
|---|---|---|
| Virgin | PET resin | 0.013 |
| Virgin | High-density polyethylene | 0.002 |
| Virgin | Antimony | 0 |
| Recycled | PET resin | 0.013 |
| Recycled | High-density polyethylene | 0.002 |
Worked out from data
The site's estimate
Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors
| Variant | Stage | Place | Emissions (kg CO2e) | Mass covered by factors |
|---|---|---|---|---|
| Virgin | Making | World | 0.07 | 0% |
| Virgin | Use | World | – | – |
| Virgin | Making | India | 0.071 | 0% |
| Virgin | Use | India | – | – |
| Recycled | Making | World | 0.002 | 0% |
| Recycled | Use | World | – | – |
| Recycled | Making | India | 0.003 | 0% |
| Recycled | Use | India | – | – |
Worked out from data
Energy to make it
Energy used to make one unit, by carrier and stage
Energy to make- Ht Heat 0.99 MJ · Materials Virgin PET bottle Calculated: 70 to 83 MJ per kg of PET resin [3], taken at 76.5 and multiplied by the 0.0129 kg body. Primary energy of all carriers; Shen et al, citing PlasticsEurope, give 68.6 MJ per kg for bottle-grade PET [4].
- El Electricity 0.002 kWh · Manufacturing Virgin PET bottle Calculated: preheating preforms takes 0.15 kWh per kg [10] times 0.0129 kg. Injection moulding and blowing air are not included.
- El Electricity 0.004 kWh · Materials Recycled PET bottle Calculated: extruding recycled PET pellets takes 315 kWh per tonne [7] times 0.0129 kg. Collection, sorting and washing are not included.
Indicative · as of 2026-11-16
Emissions by stage
Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant
| Stage | Value | Range | Unit | Variant | Place | Year | Source |
|---|---|---|---|---|---|---|---|
| Making | 0.032 | 0.028 to 0.035 kg CO2e per 500 ml bottle, virgin body resin only, cradle to gate; cap, moulding, blowing and filling not included (calculated) | kg CO2e per 500 ml bottle, virgin body resin only, cradle to gate; cap, moulding, blowing and filling not included (calculated) | Virgin PET bottle | World (region not stated) | – | [3] |
| End of life | 0.021 | – | kg CO2e per 500 ml bottle, if incinerated (as published) | Virgin PET bottle | World (region not stated) | – | [3] |
| Making | 0.01 | 0.008 to 0.012 kg CO2e per 500 ml bottle, mechanically recycled body resin only; cap, moulding, blowing and filling not included (calculated) | kg CO2e per 500 ml bottle, mechanically recycled body resin only; cap, moulding, blowing and filling not included (calculated) | Recycled PET bottle | Netherlands | 2021 | [5] |
| End of life | 0.021 | – | kg CO2e per 500 ml bottle, if incinerated (as published for a PET bottle) | Recycled PET bottle | World (region not stated) | – | [3] |
Estimate · as of 2026-11-16. No source opened splits one bottle's life into the four stages, so shares are left empty. Making covers body resin only: 2.19 to 2.73 kg CO2e per kg of virgin resin [3] or 0.6 to 0.9 t per t of mechanically recycled resin [5], times the 12.9 g body [35] (calculated); the two have different boundaries. End of life is the published figure for incinerating a 500 ml bottle [3]. Logistics and use have no figure. As a cross-check, Ball's EU study gives 0.12 kg CO2e per litre cradle to grave, including transports and end of life, for a 0.5 L still-water PET bottle, about 0.06 kg per bottle (calculated, 2020) [35].
End of life
What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place
| Route | Share | Place | Year | Source |
|---|---|---|---|---|
| Collected for recycling (PET bottles) | 33 | United States | 2023 | [26] |
| Collected for recycling (all PET) | 60 | EU | 2022 | [27] |
| Sorted for recycling (PET beverage bottles alone) | 75 | EU | 2022 | [27] |
| Recycled (PET waste, organised and unorganised sectors together; National Chemical Laboratory study) | 70 | India | 2017 | [25] |
| Recycled (all plastic waste, not PET only; OECD 2022 report) | 9 | World | 2019 | [29] |
as of 2026-11-16
Recovered as
The commodities and chemicals recovered at end of life, with recovery rates
Recovered as- PET PET resin Mechanical recycling to flake and food-grade pellets Rates differ by place: 33% of US bottles collected (2023) [26], 75% of EU beverage bottles sorted for recycling (2022) [27], 70% of India's PET waste recycled (2017) [25]. Not all collected PET becomes bottle-grade.
as of 2026-11-16
End of life in India
Collection and recycling in India, including the informal sector
In India, informal pathways of collection, sorting and aggregation dominate over formal ones [32]. A 2017 study by the National Chemical Laboratory found about 70% of PET waste recycled [25]; no newer PET-specific rate was found. EPR now requires rigid plastic packaging to carry recycled content, 30% in 2025-26 rising to 60% by 2028-29 [21]. Food-grade recyclers approved by FSSAI had about 200,000 t of capacity against demand near 350,000 t in 2026 [24].
as of 2026-11-16
Sources
- Life Cycle Environmental Impact of PET Water Bottles National Institutes of Health, NEMS web site (no author named)
- Life cycle energy and GHG emissions of PET recycling: change-oriented effects The International Journal of Life Cycle Assessment (Shen, Nieuwlaar, Worrell and Patel), 2011
- Decarbonisation options for the Dutch bottle-grade PET industry PBL Netherlands Environmental Assessment Agency and TNO (Tran and West), 2021
- EcoProfile Methodology for Plastic Recyclates, version 1.2 GreenDelta GmbH for Plastics Recyclers Europe (Horizon Europe PRIMUS project), 2025
- Boosting Energy and Resource Efficiency in the Manufacture of PET Bottles KHS Corpoplast, on PETnology online, 2010
- Guidelines on Extended Producer Responsibility for Plastic Packaging, Schedule II of the Plastic Waste Management (Amendment) Rules 2022 (CPCB annexure R2-I) Ministry of Environment, Forest and Climate Change (notified 16 February 2022), filed by CPCB as Annexure R2-I before the National Green Tribunal, 2022
- India's Recycled Plastic Squeeze ReadOn (Substack), Deb Preetendu Samaddar, 2026
- PET bottles recycling a Rs 3500 crore industry now Business Standard (PTI), 2017
- Bottle collection, PCR rate reach highs in down year for PET sales: report Packaging Dive, 2024
- PET on the road to circularity, but disparities are creating potholes Packaging Europe (Plastics Recyclers Europe data), 2024
- Plastic pollution is growing relentlessly as waste management and recycling fall short, says OECD OECD, 2022
- Landscape assessment of plastic recycling in India Confederation of Indian Industry, with WRAP, 2023