Printed circuit board: Working
What it is
The product and the job it does, in a short paragraph
A printed circuit board is a thin insulating sheet with copper tracks that carry current between electronic parts and hold them in place. This node covers bare boards (HS 8534): rigid boards of glass fibre and epoxy laminate (FR-4), flexible boards on polyimide film, and high-density interconnect (HDI) boards. Boards with chips and parts soldered on are left out; they belong to the devices. The functional unit is one square metre of board. [18][24]
as of 2026-11-15
How it works
How it does its job, step by step in plain words
The board is a sandwich of copper and insulation. FR-4 is woven glass cloth bonded with flame-retardant epoxy [18], with copper foil on one or both faces [6]. Unwanted copper is etched away so the remaining tracks form the circuit [6]. Holes drilled through the board are plated with copper so that tracks on different layers connect [19]. Boards usually have one to twenty-four conductive layers [19]. A polymer solder mask covers the tracks, so that solder sticks only to the pads where parts are fixed, and a metal or organic finish stops the exposed copper from oxidising [19]. Parts are then soldered to the pads. The glass and epoxy keep the tracks apart, and the board must stay stiff and flat through soldering heat.
as of 2026-11-15
Key specifications
The numbers that describe it, each with unit, variant, year and source
| Spec | Value | Unit | Variant | Year | Source |
|---|---|---|---|---|---|
| Common board thickness | 0.4 to 2.0 | mm | Rigid FR-4 | 2025 | [18] |
| Nominal copper foil thickness (1 oz) | 35 | micrometres | Rigid FR-4 | 2025 | [18] |
| Glass transition temperature, standard FR-4 | 130 to 140 | C | Rigid FR-4 | 2025 | [18] |
| Glass transition temperature, high-Tg FR-4 for lead-free soldering | 170 to 180 | C | Rigid FR-4 | 2025 | [18] |
| Decomposition temperature of the resin | 300 to 350 | C | Rigid FR-4 | 2025 | [18] |
| Dielectric constant at 1 MHz | 4.2 to 4.8 | dimensionless | Rigid FR-4 | 2025 | [18] |
| Conductive layers in most boards | 1 to 24 | layers | Rigid FR-4 | 2023 | [19] |
as of 2026-11-15
Variants
The variants whose make-up or footprint differs a lot, what defines each and its share of units
| Variant | Defining spec | Share | Year | Source |
|---|---|---|---|---|
| Rigid | Rigid glass fibre and epoxy laminate (FR-4) with copper tracks; one to many layers [18][19] | – | 2024 | China shipped 63% rigid boards by volume in 2024 [5]; no world share found |
| Flexible | Bendable circuits on polyimide film base with rolled copper foil [24] | 24.6 | 2023 | Share of the world PCB industry's value, TPCA and ITRI [21] |
| HDI | Rigid boards with finer tracks and small drilled micro holes between layers, for phones and servers | – | 2024 | China shipped 18% HDI by volume in 2024 [5]; no world share found |
as of 2026-11-15
Limits
The physical limits set by science and the engineering limits of today's design, with today's value
| Limit | Kind | Limit | Today | Unit | Source |
|---|---|---|---|---|---|
| Glass transition temperature of standard FR-4 (resin softens above this) | Engineering | 170 to 180 (high-Tg grades) | 130 to 140 | C | [18] |
| Dielectric constant of FR-4 (sets signal speed and loss) | Engineering | – | 4.2 to 4.8 | dimensionless at 1 MHz | [18] |
| Conductive layers in most boards | Engineering | – | 24 | layers (upper end of the usual range) | [19] |
as of 2026-11-15
Science it relies on
The science principles it works by or is limited by
Relies on- Ohm's law Copper tracks carry current with a small resistance, so track width and thickness set how much current a board can carry.
- Faraday's laws of electrolysis Hole walls are plated with copper by electrolysis to join the layers.
- Heat conduction (Fourier's law) Heat from current and from soldering must leave through the laminate, which softens above its glass transition temperature.
as of 2026-11-15
Sources
- China Reinforcing Foothold on Manufacturing Industry for PCBs Global Sources, 2025
- Alternative Materials for Printed Circuit Board Production: An Environmental Perspective Sustainability (MDPI), Nassajfar, Deviatkin, Leminen and Horttanainen, 2021
- FR4 PCB Deep Guide: Material Truth, Real Specs and When to Use (or Avoid) It JLCPCB, 2025
- Printed circuit board New World Encyclopedia
- Global Flexible PCB Market Rebounds in 2024, Driven by New Device Demand and Electric Vehicles I-Connect007, 2024
- Standardized PCB prices implemented Evertiq (reporting the China Printed Circuit Association), 2006