Printed circuit board: Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Substitute | Components design | Use a soluble or bio-based substrate instead of FR-4 | 17.7 to 7.1 kg CO2e per m2, 60% lower (Soluboard, ERM 2020) [9]; PLA and PBAT about 4 against about 20 kg CO2e per kg for FR-4 and polyimide [8] | Piloted: a marketed soluble board; bio-based substrates in life cycle study | Not found | Board makers, device brands | [9][8] |
| Change route | Making | Print silver ink on PET, PLA or paper instead of etching copper from FR-4 | Climate impact can fall to 14% of the conventional method in the 2021 study (four-layer board, with 50% of the silver assumed recycled) [6] | Research | Not found | Board makers, researchers | [6] |
| Efficiency | Making | Halve process electricity (10 against 20 kWh per m2) with an additive silver route on FR-4 | Climate impact 49% lower than the etched baseline [6] | Research | Not found | Board makers | [6] |
| Efficiency | Making | Buy cleaner electricity for board plants | Electricity generation is 41% of a four-layer board's climate impact [6] | Deployed in general; board-specific adoption not found | Not found | Board makers, grid operators | [6] |
| Design | Components design | Use fewer layers and a smaller board area | A bottom-up IoT study suggests scaling a board's footprint by area times number of layers, so footprint falls roughly in proportion [26] | Deployed (design choice) | Not found | Device designers | [26] |
| Circularity | End of life | Collect scrap boards and recover copper and precious metals | A pyrometallurgical process recovered 68.4% of copper, 92.6% of silver and 85.5% of gold; a hydrometallurgical flowsheet recovered 95% of gold and 99% of palladium [7] | Deployed for precious metals in smelters; routes for the resin and glass are at research stage | 22.3% of e-waste documented as collected and recycled, 2022 [15] | Recyclers, device brands, regulators (India EPR) | [7][15] |
| Business model | End of life | Refurbish devices so their boards stay in use | Not quantified per board; India's 72 registered refurbishers added about 92,042 tonnes a year of capacity [16] | Deployed | Not found per board | Refurbishers, device brands | [16] |
as of 2026-11-15
Sources
- Alternative Materials for Printed Circuit Board Production: An Environmental Perspective Sustainability (MDPI), Nassajfar, Deviatkin, Leminen and Horttanainen, 2021
- Recycling of Printed Circuit Boards (Integrated Waste Management, Volume II) InTech, Maria Paola Luda (in Integrated Waste Management, Volume II), 2011
- Beyond FR-4: a comparative life cycle assessment of traditional and green PCB substrates Engineering Proceedings (MDPI), Moupali Chakraborty; Kingston University repository page, 2026
- ReCollect: Efficient Manufacturing of Recyclable Composite Laminates for Electrical Goods (webinar slides) Jiva Materials Ltd, hosted by the Institute of Circuit Technology (carbon figures from Environmental Resources Management, 2020), 2020
- Global e-Waste Monitor 2024: Electronic Waste Rising Five Times Faster than Documented E-waste Recycling UNITAR, 2024
- E-Waste (Management) Rules (2022): Assessing India's Extended Producer Responsibility Framework IMPRI India (Sudeepti Joshi), 2026
- Assessing the embodied carbon footprint of IoT edge devices with a bottom-up life-cycle approach arXiv, Pirson and Bol, 2021