Material Insights · Understanding the Material World

Wind turbine blade: Evolution

Timeline

The milestones of the product, each with a source

YearEvent
1977Økær Vind Energi delivers its first set of glass fibre blades in Denmark on 26 November [40].
1978LM Glasfiber starts manufacturing wind turbine blades in Denmark [13].
2004Vestas begins European production of its V90 turbines, moving carbon fibre into the spar caps of larger blades [20].
2012Siemens unveils a 75 m blade cast in one piece in a closed mould, and LM's 73.5 m blade is held to 26 t [28][27].
2019LM Wind Power's LM 107 P is introduced in April as the world's longest rotor blade [13].
2021Siemens Gamesa launches RecyclableBlade on 7 September, with a resin that separates from the glass fibre in a heated mild acid; the first six 81 m blades are made in Aalborg [24].
2023Vestas unveils a chemical process to make epoxy blades circular [23].
2024Sany erects a 15 MW onshore prototype with 131 m blades [18].
2025153 m, 83.5 t blades leave Yantai for a 26 MW offshore turbine; European industry agrees a landfill ban from 1 January 2026 [17][7].

as of 2026-11-15

Lineage

The products and technologies it evolved from and into

Evolved from

as of 2026-11-15

Recipe changes

How what it is made of changed over time, and what drove each change

ChangeFromToDriverSource
Spar capsGlass fibreCarbon fibre in larger bladesStiffness-to-weight as blades get longer; Vestas V90 from 2004, and a US study finds 25 to 27% lower mass[20][21]
ConstructionShells made apart and bondedOne-piece blade in a closed mould (Siemens 75 m, 2012)Remove the bond line and cut weight; Siemens says a conventional design would be 25 to 50% heavier[28][4]
ResinStandard epoxy that cannot be remeltedResin that dissolves in a mild acid (RecyclableBlade, 2021)End-of-life recycling and landfill bans[24]

as of 2026-11-15

What could improve it next

Directions for improvement, today's value and the limit

DirectionMetricTodayLimitUnitSource
Lighter blades with carbon spar capsBlade mass saving against a fibreglass design25 to 27% lower mass in a US study of two reference turbinesNot found in sources% mass[21]
Longer bladesBlade length and mass153 m and 83.5 t (2025)Mass grows faster than length squared; onshore blades cannot be folded for transportm; t[17][21][29]
Lower-carbon fibreEmbodied emissions of fibreGlass fibre 2.6 and carbon fibre 19.8Not found in sourceskg CO2e per kg[5]
Recyclable bladesShare of blade materials recycledModelled as 0% in the Vestas V163 study; RecyclableBlade first six built in 2021Vestas targets a 100% recyclable rotor by 2030% recycled[1][24][22]

as of 2026-11-15

Sources

  1. Life Cycle Assessment of electricity production from an onshore V163-4.5 MW wind plant (version 1.2, 15 January 2025) Vestas Wind Systems A/S, 2025
  2. WP4 D1.1 Wind Turbine Blades Design and Manufacturing: Current State-of-the-Art Literature Review (CFAR-OC-020-31032022) Offshore Renewable Energy Catapult (Cornwall Flow Accelerator), 2022
  3. Environmental and Economic Assessment of Wind Turbine Blade Recycling Approaches ACS Sustainable Resource Management (Sandia National Laboratories and NREL authors), via PubMed Central, 2024
  4. Where do wind turbine blades go when they are decommissioned? WindEurope, 2025
  5. LM Wind Power Fact Sheet, December 2023 LM Wind Power, 2023
  6. 153-metre wind turbine blades head to testing after leaving China's Yantai port offshoreWIND.biz, 2025
  7. World's largest onshore wind turbine spins up 430 ft blades to deliver 15 MW New Atlas, 2024
  8. Carbon Fiber in the Wind CompositesWorld, 2007
  9. Optimized Carbon Fiber Composites for Wind Turbine Blades: Project Approach and Summary (SAND2019-14196C) Sandia National Laboratories, Oak Ridge National Laboratory and Montana State University, 2019
  10. Moving closer towards producing zero-waste wind turbines Vestas Wind Systems
  11. Vestas unveils circularity solution to end landfill for turbine blades CompositesWorld, 2023
  12. Siemens Gamesa launches recyclable wind turbine blade CompositesWorld, 2021
  13. The Age of the Mammoth Wind Turbine Blade POWER Magazine, 2012
  14. Feature on the Siemens B75 Quantum 75 m blade, July/August 2012 issue (page shows no title) Reinforced Plastics, 2012
  15. Wind Turbines: the Bigger, the Better U.S. Department of Energy, 2024
  16. Wind Power: Technology Brief (E07) IRENA and IEA-ETSAP, 2016
  17. Winds of Change: Økær Vind Energi 1977 to 1981 Nordisk AeroForm (Winds of Change, stories of a dawning wind power industry)
  18. Ildsjæle sparkede vindkrafteventyret i gang Ingeniøren (ing.dk), 2012