Wind turbine blade: Interventions
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Circularity | End of life | Grind or co-process decommissioned blades instead of landfilling them | In a recycling study, mechanical recycling gave the lowest net emissions for glass blades, and cement co-processing had negative net emissions | Deployed in places; assessed in a study | Industry voluntary landfill ban from 1 January 2026 | Operators, cement kilns, regulators | [5][7] |
| Circularity | End of life | Recycle carbon fibre spar caps by any recovery route | Every approach assessed for recycling the carbon fibre spar cap gave net negative emissions | Study stage | Not found | Blade makers, recyclers | [5] |
| Change route | End of life | Break epoxy down chemically (Vestas CETEC) to recover fibre and virgin-grade materials | Not quantified; Vestas targets a 100% recyclable rotor by 2030 | Piloted: testbed in Sweden, more than 500 tests | Test scale | Vestas, Stena Recycling, Olin | [22][23] |
| Substitute | Components design | Use a separable resin so blades can be recycled | Net emissions about 50% lower than solvolysis of a standard glass fibre epoxy blade, even without acetic acid recovery | Deployed: first six 81 m RecyclableBlades made in 2021 | First blades only | Blade makers | [5][24] |
| Design | Components design | Carbon fibre spar caps in long blades | 25 to 27% lower blade mass than a fibreglass design in a US study of two reference turbines; carbon fibre emits 19.8 kg CO2e per kg against 2.6 for glass | Deployed (Vestas since 2004) | Used in large blades by Vestas and Siemens Gamesa | Blade designers | [21][5][20][4] |
| Efficiency | Making | Cut the footprint of blade materials, which dominate making | In the 117 m baseline, the bill of materials is 394,156 of 419,402 kg CO2e per blade (94%, calculated) and manufacturing energy 20,819 (5%, calculated) | Not assessed | Not found | Fibre and resin makers, blade makers | [4] |
as of 2026-11-15
Sources
- WP4 D1.1 Wind Turbine Blades Design and Manufacturing: Current State-of-the-Art Literature Review (CFAR-OC-020-31032022) Offshore Renewable Energy Catapult (Cornwall Flow Accelerator), 2022
- Environmental and Economic Assessment of Wind Turbine Blade Recycling Approaches ACS Sustainable Resource Management (Sandia National Laboratories and NREL authors), via PubMed Central, 2024
- Where do wind turbine blades go when they are decommissioned? WindEurope, 2025
- Carbon Fiber in the Wind CompositesWorld, 2007
- Optimized Carbon Fiber Composites for Wind Turbine Blades: Project Approach and Summary (SAND2019-14196C) Sandia National Laboratories, Oak Ridge National Laboratory and Montana State University, 2019
- Moving closer towards producing zero-waste wind turbines Vestas Wind Systems
- Vestas unveils circularity solution to end landfill for turbine blades CompositesWorld, 2023
- Siemens Gamesa launches recyclable wind turbine blade CompositesWorld, 2021