Fracture mechanics: Discovery
The story
How the idea was found and came to be accepted
Engineers had long seen that sharp corners start failures: in 1843 William Rankine advised rounded corners in castings after railway axles broke [4]. The deeper puzzle was why solids break at so low a stress. Alan Griffith, at the Royal Aircraft Establishment, studied glass. His paper, published in 1920, argued that the weakness of ordinary solids comes from flaws, and that a crack grows when the energy it frees pays for its new surface [1, 2]. He estimated that the glass's strength without such flaws was of the order of a million pounds per square inch, against 24,900 measured in ordinary tension tests [1]. The idea was first thought to apply only to brittle solids such as glass [3]. Then welded Liberty ships cracked in World War II and Comet airliners broke apart in the 1950s [2]. George Irwin, who led the brittle fracture project at the Naval Research Laboratory from 1946, extended the theory to metals and in the early 1950s introduced the stress intensity factor [2, 5].
as of 2026-11-10
People
The people behind it, their years and what each contributed
| Name | Years | Contribution |
|---|---|---|
| Alan Arnold Griffith | 1893 to 1963 | Explained the weakness of solids by the energy balance of a growing crack, 1920 [1, 6] |
| George R. Irwin | 1907 to 1998 | Extended Griffith's idea to metals and introduced the stress intensity factor [2, 5] |
as of 2026-11-10
Milestones
The key moments, year by year
| Year | Event |
|---|---|
| 1843 | William Rankine recommends rounded corners in castings after railway axle failures [4] |
| 1920 | Griffith publishes his energy criterion for crack growth [1, 2] |
| 1946 | Irwin takes charge of the Naval Research Laboratory's brittle fracture project [5] |
| 1957 | Williams works out the stress field at a crack tip [4] |
| 1963 | Paris and Erdogan publish their law for how fatigue cracks grow [4] |
as of 2026-11-10
Sources
- The Phenomena of Rupture and Flow in Solids A. A. Griffith, Philosophical Transactions of the Royal Society of London, Series A, vol. 221 (scan on the Internet Archive), 1920, pp. 163 to 198
- Catastrophic Failures Propagate Field of Fracture Mechanics Robin L. Blumberg Selinger, MRS Bulletin (Historical Note), August 1995, 1995, p. 74
- Mechanics of solids: Stress concentrations and fracture Encyclopaedia Britannica
- Science of Cracks: Fracture Mechanics Erkan Oterkus, PeriDynamics Research Centre, University of Strathclyde (Strathprints repository)
- George R. Irwin James W. Dally, in Memorial Tributes: Volume 10, National Academy of Engineering, 2002, pp. 146 to 153
- Griffith; Alan Arnold (1893 - 1963) Royal Society archive catalogue (Fellows record)