Surface chemistry and adsorption: Technologies
Technologies
The technologies that rely on it, and how each one uses it
Relied on by 20- Asf Asphalt concrete paving The bitumen binder has to wet and stick to the stone, and water that gets between them loosens the bond.
- AWH Atmospheric water harvesting Porous sorbents take up water vapour from the air onto their huge inner surfaces and release it when warmed.
- ALD Atomic layer deposition Each gas pulse reacts only with the free sites on the surface and stops when they are used up, Langmuir's one-layer picture put to work.
- Bay Bayer alumina process New solid grows on the surfaces of seed crystals already present in the liquor.
- GC Gas chromatography Substances are separated because they stick to a solid surface with different strengths and so move along at different speeds.
- DAC Direct air capture Solid sorbents hold carbon dioxide on their surfaces until heat or vacuum frees it.
- DLE Direct lithium extraction Sorbents pick lithium out of brine by holding it on their surfaces more strongly than other salts.
- H2S Hydrogen storage Porous sorbents can hold hydrogen as whole molecules stuck to their inner surfaces; the hold is weak, so storage grows with the surface area [9].
- FG Float glass Surface tension, the spare pull at a liquid's surface, lets molten glass spread into a flat, even sheet on the metal bath.
- FFl Froth flotation Chemicals that stick to the wanted mineral's surface make it repel water, so it clings to air bubbles and floats off.
Show 10 more
- mRNA mRNA vaccines In principle terms, fat-like molecules with a water-loving end and a water-shy end gather at boundaries with water and assemble into tiny particles that wrap the mRNA.
- MB Mud brick Water films on the surfaces of clay grains make mud workable when wet and bind the grains when dry.
- PM Continuous paper machine As the sheet dries, water films pull fibres into contact and surface forces then join them.
- Ppr Papermaking Fibres bond where their surfaces touch as the water between them dries out.
- Rot Rotary printing press Offset printing depends on wetting: the damp parts of the plate repel the greasy ink.
- SnF Sand filtration of drinking water Fine particles and microbes stick to the surfaces of the sand grains as water flows past.
- WB Woodblock printing The ink must wet the wood block and then let go onto the paper, which depends on how each surface attracts it.
- Cotton T-shirt Reactive dyes are taken up on the fibre surface and then bond to it, which fixes the colour through washing.
- Footwear Soles are held to uppers by adhesive; the bond depends on how well the glue wets and sticks to each surface.
- Paint and coatings Wetting agents and dispersants spread the pigment in water, and the film must stick to the wall.
- SP Superphosphate fertiliser Phosphate binds to the surfaces of soil minerals, so only part of what is spread reaches the roots.
as of 2026-11-12
Sources
- Sorbent Storage Materials U.S. Department of Energy