Material Insights · Understanding the Material World

Cable-stayed bridge

Cables run straight from towers to the deck, an efficient form for medium-long spans.

Building and shelter · Structures · No. 441

  • Electronic age
  • Readiness 9 of 9
  • System
Building and shelter · Technology

Straight cables from a tower can hold up a span of more than a kilometre without any main cable at all.

Chart: Illustration: Cable-stayed bridge

Where it comes from

Chart: Map of where it comes from

Stays were drawn in 1615 and mixed with suspension cables in the 19th century. The modern type began with Sweden's Strömsund Bridge in 1956, and Germany then used it to replace bridges lost in the war.

Three things to know
  1. The first drawing of a cable-stayed bridge appeared in a book by Fausto Veranzio published in 1615.
  2. By 1995 only 3 cable-stayed bridges had spans over 500 m; about 25 years later there were 67.
  3. Stay cables are bundles of high-strength steel wire, usually of 1,860 MPa grade.
The journey
  1. 1 FoundationsPiers are sunk into the riverbed or ground
  2. 2 TowersConcrete or steel towers rise from the piers
  3. 3 Deck segmentsDeck pieces are added outward from each tower in balance
  4. 4 StaysEach new segment is hung from a steel cable to the tower
  5. 5 ClosureThe arms from neighbouring towers meet in the middle of the span
Covered in What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineeringStructures and materials: stress, stiffness, strength and why things breakEngineeringVibration, waves and resonance in machines and structuresEngineeringDesign, failure and safety: how engineering knowledge growsEngineering
Go deeper pick a tab to open it in full