Direct lithium extraction: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Surface chemistry and adsorption Adsorption, the sticking of lithium ions to a sorbent surface, is a common technique for selectively recovering lithium from water [4].
- Chemical equilibrium (Le Chatelier's principle) In ion exchange, beads absorb lithium in exchange for a hydrogen ion, and dilute acid reverses the exchange to release the lithium [1].
as of 2026-11-12
The science explained
The science behind it explained for a curious reader
Imagine a car park where each space accepts only one make of car. Brine is a crowd of ions, mostly sodium and potassium, with a little lithium. A sorbent is a material with spaces that suit lithium ions much better than the others, so lithium parks and the rest drive past [4]. In ion exchange, each space is occupied by a hydrogen ion, and a lithium ion takes it over, pushing the hydrogen out [1]. Once all spaces are full, the operator changes the conditions, using warm water or dilute acid, and the lithium is released into a small volume of clean liquid [1]. The sorbent is then ready to be used again. This is why DLE can take hours, where ponds rely on the sun to make the salts separate over many months [1][4].
as of 2026-11-12
Sources
- Could Direct Lithium Extraction Be a Game-Changer? IEEE Spectrum (Prachi Patel, 31 October 2023), 2023
- Challenges and opportunities of recovering lithium from seawater, produced water, geothermal brines, and salt lakes using conventional and emerging technologies Chemical Engineering Journal, vol. 498, article 155349 (Nikkhah et al.), 2024