Material Insights · Understanding the Material World

Direct lithium extraction: Energy footprint

Energy in use

The energy it uses or converts while it works, and how efficiently

Consumption
No whole-plant energy figure was found
Conversion
Pumps move brine through the sorbent; warm water or dilute acid releases the lithium
Efficiency
About 90% of the lithium in the brine recovered in Eramet's Centenario pilot tests, a company figure
Unit
% lithium recovered
Note
Recovery is from [2]. Evaporation ponds use solar energy to concentrate the brine, which is inexpensive but takes as long as 13 months in one reviewed case [4].

as of 2026-11-12

Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back

Consumes
  • El Electricity Pumps, columns and any membrane stages run on electricity; no source gives a figure.
  • Ht Heat Warm water is used to wash lithium off the loaded sorbent [1].

as of 2026-11-12

Sources

  1. Could Direct Lithium Extraction Be a Game-Changer? IEEE Spectrum (Prachi Patel, 31 October 2023), 2023
  2. Eramet inaugurates its direct lithium extraction plant in Argentina, becoming the first European company to produce battery-grade lithium carbonate at industrial scale Eramet, 2024
  3. Challenges and opportunities of recovering lithium from seawater, produced water, geothermal brines, and salt lakes using conventional and emerging technologies Chemical Engineering Journal, vol. 498, article 155349 (Nikkhah et al.), 2024