Carnot batteries: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1924 | Fritz Marguerre patents a system of two wet-steam heat stores, the first proposal for the technology [1][6] |
| 2014 | Siemens Gamesa begins operating a 5 MWh test site for its rock heat store [8] |
| 2015 | Construction begins of a pumped heat prototype on a Joule-Brayton gas cycle in the ISENTROPIC project [6] |
| 2019 | Siemens Gamesa's ETES plant in Hamburg, with 130 MWh of heat stored in volcanic rock, begins operating in June [1][8] |
| 2022 | A review finds Carnot batteries typically return 30% to 70% of the electricity stored [1] |
| 2025 | A modelling study finds silica-particle pumped thermal storage reaches 66% round trip against 57% for a molten salt design [2] |
as of 2026-11-12
Lineage
The technologies it came from and the ones that came from it
Builds on- HP Heat pumps, air conditioning and refrigeration Pumped thermal storage charges by running a heat pump between a cold and a hot store [1].
- SHS Sensible heat storage The heat is held in sensible heat stores such as a packed bed of volcanic rock or silica particles [1][2].
- ST Steam turbines and thermal power plants Heater-based plants such as ETES return the heat through a steam cycle, which sets their low efficiency of about 25% [1].
as of 2026-11-12
Sources
- Review of Carnot Battery Technology Commercial Development (Novotny et al., Energies 15(2), 647) MDPI, 2022
- Advancing Pumped Thermal Energy Storage Performance and Cost Using Silica Storage Media (Applied Energy 387, 125567) National Laboratory of the Rockies (formerly NREL), 2025
- Pumped Thermal Energy Storage Technology (PTES): Review Thermo 3(3), 396 to 411 (Rabi, Radulovic and Buick), MDPI, 2023
- Volcanic Rock Offers New Take on Energy Storage POWER Magazine (Darrell Proctor), 2019