Mechanical power transmission: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1771 | Arkwright begins cotton spinning at Cromford, applying water power to a series of mechanised processes; his water frames are driven from a water wheel by gearing, wooden line shafting and belts [1] |
| 1795 | Joseph Bramah patents the hydraulic press; it is first used at the Tower of London in 1806 [7] |
| 1871 | Edward Ellington founds the Steam Wharf and Warehouse Co, forerunner of the London Hydraulic Power Company [2] |
| 1977 | London's public hydraulic power network, once 180 miles of pipes at 800 psi, closes [2] |
| 2008 | US fluid power systems use 2.0 to 2.9 quads of energy at an average efficiency of 22% [3] |
as of 2026-11-12
Lineage
The technologies it came from and the ones that came from it
Builds on- Ger Gear train Mill drives used gearing to take power from the water wheel to the line shafts [1].
- Mot Electric motors and drives About one third of industrial and commercial electric motors drive their loads through belts [4].
- Spn Mechanised spinning Arkwright's water frames were driven from a water wheel by gearing, line shafting and belts, the basis of the factory system [1].
as of 2026-11-12
Sources
- History & Development Derwent Valley Mills World Heritage Site
- London Hydraulic Power Company Science Museum Group Collection, 2025
- Estimating the Impact (Energy, Emissions and Economics) of the U.S. Fluid Power Industry (ORNL/TM-2011/14), Love, Lanke and Alles Oak Ridge National Laboratory, 2012
- Replace V-Belts with Notched or Synchronous Belt Drives US Department of Energy, Advanced Manufacturing Office (Motor Systems Tip Sheet), via NREL, 2012
- Bramah Press Sheffield Museums Trust