Mechanical power transmission: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Takes power from an engine or motor and loses part of it to friction, slip and leaks
- Conversion
- Carries mechanical power, or turns it into fluid pressure and back
- Efficiency
- 22
- Unit
- % average for US fluid power systems, 2008
- Note
- Belt drives do far better, about 95% for new V-belts and 98% for synchronous belts [4]; compressed-air leaks can waste 20 to 30% of a compressor's output [5].
as of 2026-11-12
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Consumes- El Electricity Belt drives, hydraulics and compressors are mostly driven by electric motors; a third of industrial and commercial motors use belts [4].
- H2O Water cycle The first factory drives took their power from water wheels [1].
- Ht Heat US fluid power ran at an average 22% efficiency in 2008, so most of the input ended as heat [3].
as of 2026-11-12
Sources
- History & Development Derwent Valley Mills World Heritage Site
- Estimating the Impact (Energy, Emissions and Economics) of the U.S. Fluid Power Industry (ORNL/TM-2011/14), Love, Lanke and Alles Oak Ridge National Laboratory, 2012
- Replace V-Belts with Notched or Synchronous Belt Drives US Department of Energy, Advanced Manufacturing Office (Motor Systems Tip Sheet), via NREL, 2012
- Compressed Air System Leaks (Improving Compressed Air System Performance, Fact Sheet #7, Rev. 1) Compressed Air Challenge, 2026