Pressure and flow recovery: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1935 | In the mid-1930s the first turboexpander is designed and installed, for air separation [1] |
| 1957 | Shell Oil puts into commercial use a turboexpander train that recovers electrical power from the let-down of cracking unit flue gas [6] |
| 1960 | In the early 1960s the first turboexpander for a natural gas application is designed and installed [1] |
| 1997 | Leif Hauge, a Norwegian inventor, has several commercial ceramic pressure exchangers saving energy in plants in the Canary Islands [2] |
| 2020 | More than 5,000 turboexpanders are in operation worldwide [1] |
as of 2026-11-12
Lineage
The technologies it came from and the ones that came from it
Works with 4- GP Gas pipelines and city gas Gas is let down in pressure where high-pressure pipelines feed lower-pressure networks, one place where an expander can replace a throttling valve.
- Ref Refining and reforming Expanders in a power recovery train take energy from the flue gas of fluid catalytic cracking units [4].
- LNG LNG chain Power recovery turbines are used in LNG production, and turboexpanders in natural gas liquefaction [3][1].
- RO Reverse osmosis desalination Pressure exchangers recycle the pressure of the brine leaving reverse osmosis membranes to the incoming seawater [2].
as of 2026-11-12
Sources
- Fundamentals of turboexpander design and operation Gas Processing & LNG (T. Avetian and L. E. Rodriguez, L.A. Turbine), 2020
- Pressure exchange technology makes seawater desalination affordable WaterWorld (G. G. Pique, chief executive of Energy Recovery, Inc.), 2003
- Power recovery turbines IPIECA energy efficiency solutions (topic last reviewed 1 February 2014), 2014
- Installing a power recovery system on FCC or RFCC units Digital Refining (Tek Sutikno, Samsung Engineering America), 2010
- The evolution of FCC flue gas emissions controls, Part 1 Hydrocarbon Processing (P. K. Niccum), October 2025 issue, 2025