Pressure and flow recovery: Overview
What it does
The job the technology does for people, in a short paragraph
Pressure and flow recovery catches the energy in a gas or liquid that is being let down from high pressure, using a turbine or pressure exchanger instead of a throttling valve. A turboexpander turns the fluid's energy into mechanical work, and more than 5,000 are in operation worldwide [1]. In seawater desalination a pressure exchanger passes brine pressure back to incoming seawater at over 95% efficiency [2].
as of 2026-11-12
How it works
The working principle in plain words, step by step
Dropping a high-pressure fluid across a valve wastes its energy. An expander makes the gas pass through a turbine wheel, where it expands, cools and does work; most turboexpanders drive a compressor or a generator [1]. Isentropic efficiencies, the share of the ideal work obtained, as high as 90% are readily reached [1]. For liquids, a power recovery turbine is a pump run in reverse [3]. In reverse osmosis desalination, the brine leaving the membranes is still at high pressure. Pelton wheels recover some of it, but only about 60% in typical conditions, while a pressure exchanger recycles it directly to incoming seawater at over 95% [2]. In oil refineries, a power recovery train with an expander, an air blower and a motor-generator takes energy from the flue gas of fluid catalytic cracking units [4].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Turboexpanders in operation worldwide, more than | 5000 | units | 2020 | [1] |
| Isentropic efficiency readily achieved by a turboexpander, as high as | 90 | % | 2020 | [1] |
| Efficiency of a pressure exchanger returning brine energy to seawater, over | 95 | % | 2003 | [2] |
| Typical efficiency of Pelton devices in desalination, about | 60 | % | 2003 | [2] |
| Typical efficiency of a power recovery turbine, top of the 40 to 80% range | 80 | % | 2014 | [3] |
| Output of a Sulzer turbine from a 10 bar pressure drop, with efficiency above 80% | 470 | kW | – | [5] |
as of 2026-11-12. No source gives a data year, so the years are publication years: 2020 for the L.A. Turbine article [1], 2003 for the WaterWorld article, written by the head of the pressure exchanger's maker [2], and 2014 for IPIECA's last review [3]. The Sulzer page shows no date [5].
Where it is used
The main places and products the technology is found in
- Natural gas liquefaction and dewpoint control, where turboexpanders are standard [1]
- Ethylene plants and air separation in the petrochemical industry [1]
- Refineries, where an expander takes energy from the flue gas of fluid catalytic cracking units [4]
- Seawater reverse osmosis desalination, where brine pressure is recycled [2]
- Petrochemical, refinery and fertiliser plants using power recovery turbines of 50 kW to 3 MW [5]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- more than 5,000 turboexpanders in operation globally
- Users
- Gas processors, petrochemical plants, refineries and desalination plants
- Unit
- units
- Note
- The count is for turboexpanders only [1]; no world count of pressure exchangers or power recovery turbines was found.
as of 2026-11-12
Sources
- Fundamentals of turboexpander design and operation Gas Processing & LNG (T. Avetian and L. E. Rodriguez, L.A. Turbine), 2020
- Pressure exchange technology makes seawater desalination affordable WaterWorld (G. G. Pique, chief executive of Energy Recovery, Inc.), 2003
- Power recovery turbines IPIECA energy efficiency solutions (topic last reviewed 1 February 2014), 2014
- Installing a power recovery system on FCC or RFCC units Digital Refining (Tek Sutikno, Samsung Engineering America), 2010
- Power recovery turbines Sulzer