Electrical discharge machining: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 4- Cu Copper criticality medium Copper is a common electrode material, wearing less than brass [4]; it is on the EU critical and strategic lists [6].
- Gr Graphite criticality medium Graphite is one of the main electrode materials, compared with copper and copper-tungsten in many studies [4]; graphite is on the EU critical list [6].
- W Tungsten criticality high Copper-tungsten electrodes give a better surface finish than graphite ones [4]; tungsten is on the EU critical and strategic lists [6].
- H₂O Water criticality low Deionised water is one of the dielectric fluids, besides oil such as kerosene [4].
- St Steel criticality low Hardened tool steels for moulds and dies are the main work [3, 4].
as of 2026-11-11. No source opened gives material use per machine or per part; criticality is the writer's judgement from the EU lists [6].
Critical materials
The materials whose supply could hold it back
- Tungsten: used in copper-tungsten electrodes, which give a fine finish [4], and on the EU critical and strategic lists [6].
- Copper: the main electrode metal [4], and on both EU lists [6].
as of 2026-11-11
Sources
- Sparks of precision UNITED GRINDING Group, Motion magazine (a machine builder's customer magazine), 2025
- A review on optimization of machining performances and recent developments in electro discharge machining B. Nahak and A. Gupta, Manufacturing Review, vol. 6, article 2, 2019
- RMIS - Critical and Strategic Materials European Commission, Joint Research Centre, Raw Materials Information System