Material Insights · Understanding the Material World

Electrical discharge machining: Overview

What it does

The job the technology does for people, in a short paragraph

Electrical discharge machining cuts metal with sparks instead of a blade. Because it does not push on the work, it shapes conducting metals whatever their hardness [4], such as hardened steel for moulds and dies, and parts for aircraft engines and medical implants [3, 4]. It was found in 1943 [2], entered Soviet factories from 1946 [7], and Japan alone built numerically controlled machines worth 40.3 billion yen in 2024 [5].

as of 2026-11-11

How it works

The working principle in plain words, step by step

The tool, called an electrode, and the workpiece are both wired to a power supply and held a tiny distance apart in an insulating fluid such as oil or deionised water [3, 4]. The supply sends short voltage pulses. Each pulse breaks down the fluid in the gap and a spark jumps across, forming a narrow channel of plasma, hot ionised gas [4]. The heat where the spark lands is high enough to vaporise metal [4], so each spark leaves a tiny crater. The fluid then flushes the debris away [3]. Millions of sparks, steered by the machine's control, copy the electrode's shape into the work. A die-sinking machine uses a shaped copper or graphite electrode; a wire machine cuts outlines with a thin moving wire [3, 4].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Japan's production of numerically controlled EDM machines40.3billion yen2024[5]
Accuracy offered by precision wire machines for stamping tools2micrometres, less than2025[3]
Makers of EDM machine tools in China200manufacturers, more than– [1]
Countries granting patents on the Lazarenko method5countries1946[2]

as of 2026-11-11. The accuracy figure carries 2025, the publication year of the article, not a data year; it is the builder's own claim for its wire machines [3]. The Lazarenko institute page shows no year of any kind for its count of Chinese makers, so that row has none [1]. The Japanese output is the 2024 data year of the 2025 report [5].

Where it is used

The main places and products the technology is found in

  • Cavities of injection moulds and forging dies
  • Punching and stamping tools cut by wire
  • Fir-tree slots and turbine discs in aircraft engines
  • Fine holes and channels in medical implants
  • Tooling for electronic connectors and electric motor laminations

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
Numerically controlled EDM machines worth 40.3 billion yen in Japan [5]
Unit
JPY of machines made
Year
2024
Note
Japan only; no world count of machines was found. China has more than 200 makers of the machines [1].

as of 2026-11-11

Sources

  1. Boris Lazarenko - Institute of Applied Physics Institute of Applied Physics, Chisinau, Moldova
  2. ОБ ОТКРЫТИИ И РАЗВИТИИ ЭЛЕКТРОЭРОЗИОННОЙ ОБРАБОТКИ МАТЕРИАЛОВ. К 60-ЛЕТИЮ ОТКРЫТИЯ СПОСОБА B. N. Zolotykh, Elektronnaya Obrabotka Materialov, vol. 39, no. 3 (abstract in English), 2003
  3. Sparks of precision UNITED GRINDING Group, Motion magazine (a machine builder's customer magazine), 2025
  4. A review on optimization of machining performances and recent developments in electro discharge machining B. Nahak and A. Gupta, Manufacturing Review, vol. 6, article 2, 2019
  5. Machine Tool Industry Japan 2025 Japan Machine Tool Builders' Association, 2025
  6. Academician Boris Romanovich Lazarenko, the pioneer of the electroerosion machining method (in Russian) M. K. Bologa, Elektronnaya Obrabotka Materialov, vol. 46, no. 6, pp. 127 to 135, 2010