Material Insights · Understanding the Material World

Injection moulding: Overview

What it does

The job the technology does for people, in a short paragraph

Injection moulding makes plastic parts by forcing molten polymer into a closed metal mould, where it sets in the exact shape of the cavity. It makes complicated, precise parts in large numbers: toy bricks, medical parts, cutlery, machine housings and bowls [3]. The Hyatt brothers patented the first machine in 1872 [1], and it is now the most widely used way to shape thermoplastics [3].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Plastic pellets fall from a hopper onto a turning screw inside a heated barrel. The screw carries them forward, and its mechanical work together with heaters melts them [3, 4]. Molten plastic collects in front of the screw. The screw then moves forward like a ram and pushes the melt through a narrow gate into a cooled mould [4]. The plastic touches the cold metal, gives up its heat and hardens. Pressure is held while it shrinks so the part stays full. The mould then opens and ejector pins push the part out [4]. Because the resin is melted in a hot section and the mould stays cool, the cycle can repeat several times a minute for small parts [4].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World plastics production, all processes430.9million tonnes2024[5]
Europe's share of world plastics production12%2024[5]
Circular plastics (post-consumer recycled, bio-based and carbon-captured) as a share of production15.4%2024[5]
Turnover of ENGEL, a leading injection moulding machine maker, financial year 2024/251.5billion EUR2025[6]

as of 2026-11-11. No source opened gives the share of plastics that is injection moulded; the production figures cover all plastics and all processes [5].

Where it is used

The main places and products the technology is found in

  • Toys and construction bricks
  • Medical components
  • Car interior panels, clips and housings
  • Housings for machines, appliances and electronics
  • Household goods such as cutlery, bowls and caps

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
No world count of moulded parts was found; world plastics production of all kinds was 430.9 million tonnes [5]
Unit
tonnes of plastic
Year
2024
Note
Counts all plastics made, of which injection moulding uses a part.

as of 2026-11-11

Sources

  1. Improvement in Processes and Apparatus for Manufacturing Pyroxyline (US patent 133,229) Google Patents, 1872
  2. Injection moulding Museum of Design in Plastics, Arts University Bournemouth
  3. Plastic: Injection molding Encyclopaedia Britannica
  4. Plastics the Fast Facts 2025 Plastics Europe (October 2025), 2025
  5. ENGEL expands market share amid global uncertainty ENGEL Austria, press release, 2025