Material Insights · Understanding the Material World

Injection moulding: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Macromolecules (polymer theory) Thermoplastics are long chain molecules that soften when heated and set again on cooling, which lets a melt fill a mould and keep its shape.
Limited by
  • Heat conduction (Fourier's law) The part can leave the mould only when its heat has flowed into the cold metal, so cooling sets much of the length of each cycle.

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1870John W. Hyatt and Isaiah HyattPatented the process for making celluloid from pyroxyline, the plastic their 1872 machine was built to shape [1]
1922Hermann Staudinger and J. FritschiProposed that polymers are giant molecules held by ordinary chemical bonds [7]
1933Eric Fawcett and Reginald Gibson, ICIFound polyethylene, now one of the commonest moulding plastics, as a waxy solid in a high-pressure experiment [3, 8]

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Picture a bowl of cooked spaghetti. Cold, the strands cling and the mass holds its shape; warm and stirred, they slide past each other and the mass flows. A thermoplastic is made of very long chain molecules, as Staudinger argued in 1922 [7], and it behaves the same way. Heat lets the chains slide, so the melt can be pushed down a narrow channel into every corner of a mould. Inside the cold mould the chains lose that energy and lock together again, so the plastic keeps the shape of the cavity. The catch is time: heat has to flow out through the steel walls, and thick parts take longer to set. That is why designers keep walls thin and even.

as of 2026-11-11

Sources

  1. Improvement in Processes and Apparatus for Manufacturing Pyroxyline (US patent 133,229) Google Patents, 1872
  2. Injection moulding Museum of Design in Plastics, Arts University Bournemouth
  3. Hermann Staudinger Encyclopaedia Britannica
  4. Dermot Manning and colleagues at ICI - Plastic Fantastic The Chemical Engineer, IChemE (Claudia Flavell-While), 2011