Material Insights · Understanding the Material World

Carbon chemistry: from hydrocarbons to polymers: Key terms, quiz and sources

All courses / Understanding Science / Module 12: Carbon chemistry: from hydrocarbons to polymers Wrap-up

Carbon chemistry: from hydrocarbons to polymers: review

Key terms

Organic chemistry
The chemistry of carbon compounds, usually with hydrogen and often oxygen, nitrogen, sulphur or halogens; not the same as organic farming.
Vitalism
The old belief that substances of living things need a vital force and cannot be made from mineral matter; it faded after Wöhler's urea of 1828 and many later syntheses.
Tetravalent
Able to form four bonds; carbon is, and the four bonds point to the corners of a tetrahedron.
Structural isomers
Molecules with the same formula but different bonding patterns, such as butane and methylpropane, or ethanol and dimethyl ether.
Configuration and conformation
Configuration is which atom is bonded to which; conformation is the shape a molecule takes by twisting about single bonds.
Hydrocarbon
A compound of only carbon and hydrogen.
Alkane
A saturated hydrocarbon with only single bonds, formula CnH2n+2.
Alkene and alkyne
Hydrocarbons with a carbon-carbon double bond, or a triple bond; they are unsaturated and add atoms across the multiple bond.
Fractional distillation
Separation of a mixture by boiling point, as when vapours of crude oil condense at different heights in a column.
Octane number
A scale of resistance to knocking in an engine: heptane is 0 and isooctane 100.
Aromatic compound
A compound with a benzene-type ring in which electrons are shared round the ring, giving unusual stability.
Delocalisation
The sharing of electrons over several atoms instead of a single bond; it lowers the energy of benzene by about 152 kJ per mole.
Functional group
A small cluster of atoms, such as OH or C=O, that gives similar behaviour wherever it appears in a molecule.
Heteroatom
In an organic molecule, any atom that is neither carbon nor hydrogen, such as oxygen or nitrogen.
Alcohol, phenol and ether
Compounds with an OH group on a saturated carbon, an OH group on a benzene ring, and an oxygen linking two carbons.
Amine and alkaloid
An amine is an organic base built on nitrogen; alkaloids are bitter plant amines such as caffeine, nicotine and quinine.
Carbonyl group
A carbon double-bonded to oxygen, found in aldehydes, ketones, carboxylic acids, esters and amides.
Ester and amide
The links formed when an acid joins an alcohol, or an amine, with loss of water; esters smell fruity and amides hold proteins and nylon together.
Monomer and polymer
A monomer is a small repeating unit; a polymer is a very long molecule made of many of them, as Staudinger argued in 1920.
Addition polymer
A polymer formed when monomers with double bonds open and join with nothing lost, such as polyethylene.
Condensation polymer
A polymer whose links each release a small by-product, usually water, such as PET and nylon.
Thermoplastic and thermoset
A thermoplastic softens on heating and can be remoulded; a thermoset is cross-linked and chars instead.
Degree of polymerisation
The number of repeat units in a chain; polymer mass equals repeat-unit mass times this number.
Mismanaged plastic waste
Plastic waste dumped, openly burned or leaked, outside any waste system; 22 per cent of the 2019 total by the OECD.
Downcycling
Recycling that gives a lower-grade product, because heating shortens chains and additives and mixed polymers remain.

Try it in the table

  • Open the node 'Structural theory of organic chemistry'. Draw all three isomers of C5H12 from Part 1 and put each boiling point beside it, then say which has the weakest dispersion forces and why.
  • Open the nodes 'Crude oil' and 'Distillation'. Using the fraction ranges in Part 2, say at which level of a column a molecule with 12 carbons would be drawn off, and what that fraction is used for.
  • Open the node 'Benzene' and the Understanding Chemicals module 'From crude oil and natural gas to the C1-C4 building blocks'. Find where aromatics are made in a refinery, and repeat the 152 kJ per mole stability calculation from Part 3 using 120 kJ per mole for cyclohexene.
  • Open 'Nylon (PA6, PA66)' and 'PET resin'. Repeat the water-loss sums of Part 5 for nylon 66 and PET, then compare the monomer needs with the plant inputs the nodes list.
  • Open 'Macromolecules (polymer theory)'. Use M = n x m to find the molar mass of a polypropylene chain of 8,000 units (42 g per mole per unit) and say whether it would be a liquid, a wax or a solid at room temperature.
  • Open 'Plastic, paper and glass recyclers' and the Understanding Chemicals module 'Bioplastics: PLA, PHA, bio-PE and starch blends'. Using the OECD shares in Part 6, work out how many tonnes of a 10,000-tonne plastic stream would be recycled, burned, landfilled and mismanaged at the 2019 world averages.

Final quiz

Why is it wrong to say that Wöhler's 1828 synthesis of urea ended vitalism in a single stroke?

Wöhler's own claims were cautious. The belief declined over decades as acetic acid, fats and many more compounds were synthesised.

A saturated open-chain molecule has 9 carbons. How many hydrogens does it hold?

CnH2n+2 gives 2 x 9 + 2 = 20, which is nonane, C9H20.

Pentane boils at 36 degrees C, and its branched isomer 2,2-dimethylpropane at about 10. The best reason is

Both have the same formula and mass. Dispersion forces act at the surfaces where molecules touch, and a rounder molecule touches less.

In fractional distillation of crude oil, which fraction leaves from the lowest, hottest part of the column?

Light molecules stay vapour and rise until they condense higher, where it is cooler. The heaviest stay liquid and are drawn off at the bottom.

A fuel has an octane number of 95. In the test engine it knocks like a blend of

The scale is set by the share of isooctane. Heptane is 0 and isooctane is 100.

Benzene releases about 208 kJ per mole on adding hydrogen to its ring, where three separate double bonds would give about 360. The difference shows

360 minus 208 is 152. The shared electrons lower the energy, which is why benzene resists addition and prefers substitution.

Which pair of groups both contain a carbonyl (C=O)?

An ester has C(=O)O-C and an amide C(=O)N. Alcohols, ethers, amines and phenols lack C=O.

Nylon 66 is a condensation polymer because

Adipic acid and hexamethylenediamine join as amides, releasing water at each link. Addition polymers lose nothing.

A polyethylene chain has 15,000 CH2CH2 units. Its molar mass is about

15,000 x 28 = 420,000 g per mole. Mass is the repeat-unit mass times the number of units.

By the OECD figures for 2019, which statement is correct?

The shares were 9 per cent recycled, 19 per cent incinerated, 50 per cent landfilled and 22 per cent mismanaged. Waste more than doubled over 2000 to 2019.
Next module: The cell: how life is built and how it uses energy →

Sources for this module