Carbon chemistry: from hydrocarbons to polymers: Polymers: long chains from small units
All courses / Understanding Science / Module 12: Carbon chemistry: from hydrocarbons to polymers Part 5 of 6Polymers: long chains from small units
A polymer is a very long molecule built by joining thousands of small ones: carrier bags, polyester shirts, rubber tyres, cotton and DNA among them. This part covers the idea and its history, the two ways chains grow, and how chain arrangement makes a bottle, a fibre or a rubber band.
5.1 A polymer is one enormous molecule, as Staudinger argued in 1920, and its size is simply the repeat unit times the number of repeats
Rubber, cotton and silk puzzled early chemists. They did not crystallise, did not boil and were very sticky in solution. A leading view said they were clumps of small molecules held loosely together. In 1920 Hermann Staudinger argued the opposite: they are true molecules, with ordinary covalent bonds, but huge, made of one small unit repeated over and over. He called them macromolecules. He won the 1953 Nobel Prize in Chemistry. The site's node 'Macromolecules (polymer theory)' tells the story.
The small unit is the monomer and the chain is the polymer. A polymer's mass is the repeat-unit mass times the number of units, called the degree of polymerisation. A sample holds chains of many lengths, so the figure quoted is an average. Polyethylene is the simplest: the repeat unit is CH2CH2, mass 28 g per mole, and a typical sample has chains of a few thousand to tens of thousands of units.
Short chains of 10 carbons are a liquid like diesel. Chains of 50 are a wax. Past about a thousand units, the chains knot through one another like the fibres in felt, which makes the material tough and unable to flow unless hot. Long chains also have many points along their length where dispersion forces bind them to neighbours, so the sum of tiny attractions becomes very large. This is why polyethylene is a strong film while ethane is a gas, though both are the same atoms in the same pattern.
- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- Standard histories of organic chemistry and polymers, as summarised in the ACS National Historic Chemical Landmarks and Encyclopaedia Britannica · standard dates not re-fetched: Kolbe's acetic acid (1845), Hoffmann's aspirin at Bayer (1897), Goodyear's vulcanisation (1839), Staudinger's Nobel Prize (1953), Ziegler and Natta (Nobel 1963), Heeger, MacDiarmid and Shirakawa (Nobel 2000)
5.2 In addition polymers the double bond of the monomer opens and the units clip together with nothing lost, which gives polyethylene and its relatives
In an addition polymer, a monomer with a C=C bond opens its weak second pair, and the molecules snap one onto the next. Nothing leaves. An initiator starts each chain, and its reactive end then adds monomers one after another.
Polyethylene came by accident. In March 1933 two chemists at ICI, Gibson and Fawcett, were squeezing ethylene at about 1,900 atmospheres and 170 degrees C when they found a waxy solid. Repeated in 1935, the process was run at industrial scale from 1939 in a plant making 100 tonnes a year. This gave low-density polyethylene, whose chains branch, so they pack loosely. In the 1950s, Karl Ziegler and Giulio Natta found catalysts that join ethylene at low pressure into straight chains that pack closely and give high-density polyethylene. Both shared the 1963 Nobel Prize in Chemistry. Natta's catalysts also made propene join in a regular pattern, giving polypropylene.
Other vinyl monomers swap one hydrogen of ethylene for another group. Replace it with chlorine and you get PVC, with a benzene ring polystyrene, with a methyl group polypropylene, and with fluorine in place of all four hydrogens the very slippery PTFE, sold as Teflon. Roy Plunkett at DuPont found it by chance in 1938, as a white powder inside a cylinder of tetrafluoroethylene gas that had stopped flowing. Each side group changes stiffness, density, softening point and how well the plastic resists chemicals. For the industrial side of these processes, see 'Ziegler-Natta polymerisation', 'Polyethylene (LDPE, LLDPE)', 'Polypropylene', 'PVC' and 'Fluoropolymers (PTFE, PVDF)', and the Understanding Chemicals module 'From building blocks to plastics, fibres and detergents'.
| Polymer | Monomer | Density (g per cm3) | Everyday use |
|---|---|---|---|
| Low-density polyethylene (LDPE) | Ethylene | about 0.92 | Carrier bags, cling film |
| High-density polyethylene (HDPE) | Ethylene | about 0.95 | Milk jugs, pipes, buckets |
| Polypropylene (PP) | Propene | about 0.90 | Food boxes, ropes, car parts |
| Polyvinyl chloride (PVC) | Vinyl chloride | about 1.4 | Pipes, window frames |
| Polystyrene (PS) | Styrene | about 1.05 (foam far lower) | Disposable cups, packaging foam |
| Polytetrafluoroethylene (PTFE) | Tetrafluoroethylene | about 2.2 | Non-stick pans |
Rounded standard densities. Polyolefins float on water; PVC and PTFE sink. This matters for sorting in Part 6.
Source: Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, quoted to two or three figures as round numbers for estimates; not re-fetched in this session- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- The Chemical Engineer, Dermot Manning and colleagues at ICI: Plastic Fantastic · web
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- Standard histories of organic chemistry and polymers, as summarised in the ACS National Historic Chemical Landmarks and Encyclopaedia Britannica · standard dates not re-fetched: Kolbe's acetic acid (1845), Hoffmann's aspirin at Bayer (1897), Goodyear's vulcanisation (1839), Staudinger's Nobel Prize (1953), Ziegler and Natta (Nobel 1963), Heeger, MacDiarmid and Shirakawa (Nobel 2000)
- Science History Institute, Roy J. Plunkett · web
5.3 In condensation polymers each link releases a small by-product such as water, and Carothers used this to build polyester and nylon on purpose in the 1930s
Part 4 showed that an acid and an alcohol join as an ester and an acid and an amine as an amide, each losing water. Give each monomer two reactive ends and the step can repeat at both ends, building a chain. This is condensation polymerisation. The monomers need not have double bonds, and a small molecule is lost at every link, so the polymer weighs less than the sum of its monomers.
Wallace Carothers began his polymer research at DuPont in 1928 with a plan, to build long chains from known pieces and prove that Staudinger was right. His group made a neoprene rubber in 1932 and then turned to fibres. Polyamides came out best: in 1935 they made nylon 66, from adipic acid and hexamethylenediamine, each with six carbons. DuPont chose it for full production in July 1935. It was announced publicly on 27 October 1938. Stockings followed in May 1940, then wartime parachutes. The site's nodes 'Nylon (PA6, PA66)' and 'Nylon (polyamide synthesis)' cover the production.
PET, polyethylene terephthalate, is a polyester. Whinfield and Dickson, working for the Calico Printers Association in England, made it from ethylene glycol and terephthalic acid, beginning in 1940. It became Terylene and Dacron fibre in the 1950s, then bottles. Because nylon 66 and PET are each built from two different monomers, they are called copolymers. The link between two nylons or polyesters is also the link in nature's own polymers: proteins have amide links between amino acids, and starch and cellulose are chains of glucose joined with loss of water. Bakelite, made by Leo Baekeland in 1907 from phenol and formaldehyde and generally counted the first commercially successful fully synthetic plastic, is also a condensation polymer. See 'Bakelite (phenolic resin)', 'PET resin' and 'Polyester fibre'.
each acid end meets an amine end and a water molecule leaves; the product still has reactive ends, so the chain keeps growing
2 Melt and spinthe molten polymer is pushed through fine holes and drawn so the chains line up and give strength
Outputs Nylon 66 fibrerepeat unit 226.3 g per mole (calculated) Water2 x 18.0 g per mole of repeat unitThe 66 means six carbons in each monomer.
Source: American Chemical Society, National Historic Chemical Landmarks: Wallace Carothers and the Development of Nylon, https://www.acs.org/content/dam/acsorg/education/whatischemistry/landmarks/carotherspolymers/modern-polymer-science-wallace-h-carothers-historical-resource.pdf (Carothers began his studies of giant molecules at DuPont in 1928; neoprene 1932; DuPont chose the fibre in July 1935 for full-scale production; announced by Charles Stine on 27 October 1938; nylon stockings introduced nationwide on 15 May 1940; wartime output diverted to military needs; Staudinger's proposal of 1920)- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- American Chemical Society, National Historic Chemical Landmarks: Wallace Carothers and the Development of Nylon · web
- Encyclopaedia Britannica, Polyethylene terephthalate · web
- Standard histories of organic chemistry and polymers, as summarised in the ACS National Historic Chemical Landmarks and Encyclopaedia Britannica · standard dates not re-fetched: Kolbe's acetic acid (1845), Hoffmann's aspirin at Bayer (1897), Goodyear's vulcanisation (1839), Staudinger's Nobel Prize (1953), Ziegler and Natta (Nobel 1963), Heeger, MacDiarmid and Shirakawa (Nobel 2000)
- Cosmos magazine, Science history: the man whose balls didn't explode (Leo Baekeland), citing the ACS National Historic Chemical Landmark · web
5.4 Whether a polymer is a plastic, a fibre or a rubber depends on how its chains are arranged and tied together, not on which atoms it has
Polymers divide by what happens when you heat them. A thermoplastic, such as polyethylene, PET or nylon, softens on heating and sets on cooling, so it can be melted and moulded again and again. This is what makes most of them recyclable. A thermoset, such as Bakelite or epoxy, has chains tied to one another by cross-links in a single network. Heating it only burns it, so it cannot be remelted. An elastomer, such as rubber, has long coiled chains tied together only a little, so it stretches and then springs back. Charles Goodyear found in 1839 that heating natural rubber with sulphur adds cross-links of this kind and gives vulcanised rubber that stays elastic in heat and cold. See 'Vulcanisation of rubber'.
In a drawn fibre the chains lie side by side along the thread, and the forces between them hold well along that direction. Amide links in nylon make hydrogen bonds between neighbouring chains, and that is why nylon is strong. Regions where chains pack neatly are crystalline and stiff. Regions where they tangle are amorphous and soft. High-density polyethylene is more crystalline than low-density, so it is stiffer and denser.
The field is still moving. The 2000 Nobel Prize in Chemistry went to Heeger, MacDiarmid and Shirakawa for showing that chains with alternating double bonds can be made to conduct electricity. In all cases the rule is the same: the chemical group sets the type of attraction, and the length, branching and cross-linking set how the chains behave together.
| Class | Chain arrangement | On heating | Examples |
|---|---|---|---|
| Thermoplastic | Separate chains, held by attractions between them | Softens; can be remoulded | Polyethylene, PET, nylon, PVC |
| Thermoset | Chains tied into a rigid network | Does not melt; chars | Bakelite, epoxy resin |
| Elastomer | Coiled chains, lightly cross-linked | Stays elastic; very hot, degrades | Vulcanised rubber, silicone rubber |
| Fibre | Chains aligned along the thread | Softens at a definite melt | Nylon, polyester, cotton (cellulose) |
Compare the node 'Macromolecules (polymer theory)'.
Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 14, 'Organic Compounds'- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Standard histories of organic chemistry and polymers, as summarised in the ACS National Historic Chemical Landmarks and Encyclopaedia Britannica · standard dates not re-fetched: Kolbe's acetic acid (1845), Hoffmann's aspirin at Bayer (1897), Goodyear's vulcanisation (1839), Staudinger's Nobel Prize (1953), Ziegler and Natta (Nobel 1963), Heeger, MacDiarmid and Shirakawa (Nobel 2000)
See it in the table
H₂O WaterCt CottonRbr Natural rubberCl2 ChlorineH2 HydrogenC2H4 EthyleneBz BenzeneHCHO FormaldehydeLLDPE Polyethylene (LDPE, LLDPE)HDPE High-density polyethylenePP PolypropylenePVC PVCPET PET resinPA Nylon (PA6, PA66)Check your understanding
What is lost when nylon 66 forms from adipic acid and hexamethylenediamine?
Each acid end and amine end join as an amide and release water. Because a small molecule leaves at each link, it is a condensation polymer.Polyethylene is made from a monomer with a C=C bond. How does the polymer grow?
The weaker second pair of the double bond breaks open so each carbon takes a new neighbour. The chain is an addition polymer and has the same atoms as the monomers.A polymer chain has 5,000 repeat units of CH2CH2 (28 g per mole). Its molar mass is about
5,000 x 28 = 140,000. Polymer mass is the repeat-unit mass times the number of repeats.