Carbon chemistry: from hydrocarbons to polymers: Hydrocarbons, crude oil and fuels
All courses / Understanding Science / Module 12: Carbon chemistry: from hydrocarbons to polymers Part 2 of 6Hydrocarbons, crude oil and fuels
The simplest organic molecules hold only carbon and hydrogen. This part covers the saturated chains called alkanes, shows how boiling point alone sorts crude oil into fractions, and explains why petrol needs the right molecular shape.
2.1 Alkanes are chains with only single bonds, and their boiling points climb with length because longer chains stick together more
A hydrocarbon contains only carbon and hydrogen. If every bond is single, so that no carbon could take another hydrogen, it is saturated, and the family is the alkanes, CnH2n+2. Their names run methane, ethane, propane, butane, then pentane to decane from the Greek numbers. Propane and butane make up the cooking gas in an Indian cylinder.
The pattern in the table below follows from module 10. Alkane molecules are nonpolar, so the only pull between them is the dispersion force, and it grows with the number of electrons and with the length of surface in contact. Each added CH2 group raises the boiling point by roughly 20 to 30 degrees C near the start of the series. Ordinary paraffin wax is a mixture of chains with about 20 to 40 carbons and melts near 50 to 65 degrees C.
| Name | Formula | Boiling point (degrees C) | State at 25 degrees C | Where you meet it |
|---|---|---|---|---|
| Methane | CH4 | -162 | Gas | Natural gas, biogas |
| Propane | C3H8 | -42 | Gas | LPG in cylinders |
| Butane | C4H10 | -1 | Gas | Lighters, LPG |
| Hexane | C6H14 | 69 | Liquid | Solvent for extracting edible oil |
| Octane | C8H18 | 126 | Liquid | Main petrol component |
| Hexadecane | C16H34 | 287 | Liquid | Diesel range |
| Paraffin wax | about C20 to C40 | melts 50 to 65 | Waxy solid | Candles |
Boiling points of straight chains, rounded. Module 10 (Matter and bonding) explains why dispersion forces rise with size.
Source: Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, quoted to two or three figures as round numbers for estimates; not re-fetched in this session- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
2.2 Crude oil is split by boiling point, because a heated mixture gives vapour that condenses wherever the column is cool enough
Crude oil from the ground is not one substance. It is thousands of hydrocarbons, mostly alkanes, ring-shaped cycloalkanes and aromatics, with small amounts of sulphur and nitrogen compounds. Crude formed from plankton and algae buried in sea-floor mud and slowly cooked by heat and pressure over millions of years. Coal, mostly from buried land plants, is the solid cousin, rich in large carbon-ringed molecules. A refinery's first job is not to change crude's molecules but to sort them, by fractional distillation.
Distillation works because big molecules are slow to escape into vapour. The crude passes through a furnace at about 350 to 400 degrees C, which turns most of it to vapour, and enters near the base of a tall column fitted with trays. Liquid running back down cools the rising vapour, so the column grades from hottest at the base to coolest at the top. A given molecule climbs until it meets a tray cooler than its boiling point, condenses there and is piped off with others of similar size. Each product is therefore a fraction with a boiling range, not a pure compound. Gases too light to condense leave from the top, and the heaviest part, which never boiled, leaves from the bottom.
What the barrel contains does not match what the market wants, so refineries also break long chains into short ones, called cracking, and reshape molecules, called reforming. Those steps, and what the chemicals industry makes from naphtha and gas, belong to the Understanding Chemicals module 'From crude oil and natural gas to the C1-C4 building blocks'. The site's nodes 'Crude oil' and 'Distillation' cover the commodity and the equipment.
heated to about 350 to 400 degrees C so most of it becomes vapour
2 Columncool at the top, hot at the bottom; vapours condense on trays where they meet a cooler level
3 Fractions drawn offgas (butane and lighter) below about 30 degrees C; naphtha, for petrol and chemicals, about 30 to 190 (roughly C5 to C10); kerosene about 190 to 270 (roughly C11 to C15); gas oil, including diesel, about 270 to 425 (roughly C15 to C27)
Outputs Residueboils above about 425 degrees C; vacuum distillation splits it further and leaves bitumen for roadsRounded cut points from one teaching reference; each refinery sets its own, so the Understanding Chemicals module quotes slightly different ranges. Carbon ranges are calculated from the boiling points of straight-chain alkanes (decane 174, pentadecane 270 degrees C).
Source: Penn State University, FSC 432 Petroleum Refining, Cut Points (Table 4.1, TBP cut points), https://courses.ems.psu.edu/fsc432/book/export/html/612 (butanes and lighter; light naphtha 32 to 88 C; heavy naphtha 88 to 193 C; kerosene 193 to 271 C; light gas oil 271 to 321 C; heavy gas oil 321 to 425 C; vacuum gas oils 425 to 564 C; vacuum residue above 565 C)- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- Penn State University, FSC 432 Petroleum Refining, Cut Points (Table 4.1, TBP cut points) · web
- Centre for Industry Education Collaboration, University of York, The Essential Chemical Industry: Distillation · web
2.3 Petrol burns smoothly when its molecules are compact and branched, which is what an octane rating measures
A petrol engine compresses a mix of fuel vapour and air to about a tenth of its volume, then fires a spark. The flame should sweep across the cylinder. Compression raises the temperature, and if some fuel ignites before the flame reaches it, the pressure jumps abruptly and the engine knocks, a metallic pinging that wastes energy and damages pistons. Fuel molecules differ in how readily they ignite under compression. Straight chains break and react readily, so they knock easily. Branched, compact molecules and rings resist.
The octane number puts a figure on this. It is defined by comparison with two reference compounds in a test engine. Heptane, a straight chain of seven carbons, is given 0. Isooctane, 2,2,4-trimethylpentane, a branched molecule of eight carbons, is given 100. A fuel with an octane number of 91 knocks in the test as a blend of 91 per cent isooctane and 9 per cent heptane would. A compound can score above 100: toluene scores about 120 and ethanol about 109, so blending ethanol into petrol raises the rating. India reached 20 per cent ethanol in its petrol in 2025-26, using ethanol made from sugarcane, maize and surplus rice. See the node 'Bioethanol' and module 11 (Chemical reactions) for the fuel and carbon side of combustion.
This is why a refinery reforms and branches its molecules rather than only distilling them. A fraction from the column often rates around 60 to 70, too low for a modern engine, and reforming raises it by rearranging chains into branches and rings.
| Compound | Shape | Octane number |
|---|---|---|
| Heptane | Straight chain, 7 carbons | 0 |
| Hexane | Straight chain, 6 carbons | about 25 |
| Isooctane | Branched, 8 carbons | 100 |
| Toluene | Aromatic ring with a methyl group | about 120 |
| Ethanol | Alcohol, 2 carbons | about 109 |
Rounded standard values; the research method is used for pump labelling.
Source: Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, quoted to two or three figures as round numbers for estimates; not re-fetched in this session- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 14, 'Organic Compounds'
- Rounded standard reference values (bond energies, boiling points, densities, molar masses, heating values) as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · quoted to two or three figures as round numbers for estimates; not re-fetched in this session
- Press Information Bureau, Government of India, factsheet on ethanol blending (5 July 2026) · web
See it in the table
Oil Crude oilGas Natural gasMz MaizeRi RiceH2 HydrogenO2 OxygenTol TolueneEtOH BioethanolCheck your understanding
A refinery column separates crude oil into fractions mainly because
Distillation is a physical sorting by boiling point. The hot vapour rises and each kind condenses where the temperature drops below its own boiling point.Why does a longer straight-chain alkane have a higher boiling point?
Alkanes are nonpolar, so dispersion forces are the only attraction between molecules, and they grow with size and contact area.A fuel matches a mix of 95 per cent isooctane and 5 per cent heptane in the test engine. What is its octane number?
By definition the rating equals the per cent by volume of isooctane in the matching blend.