Material Insights · Understanding the Material World

Carbon chemistry: from hydrocarbons to polymers: Plastics and what becomes of them

All courses / Understanding Science / Module 12: Carbon chemistry: from hydrocarbons to polymers Part 6 of 6

Plastics and what becomes of them

The stability that makes a polymer useful also makes it last. This part follows plastic from production to waste with the OECD's figures, explains why recycling is chemically hard, and sets India beside the world.

6.1 Plastic production doubled between 2000 and 2019 because a few cheap polymers do so many jobs, and most of it is used once

Look around a kitchen. The bucket is polyethylene, the bottle PET, the pipe under the sink PVC, the lunch box polypropylene, the shirt polyester. Plastics replaced glass, paper, metal and wood in many roles because they are light, tough, waterproof, easy to mould and cheap. Their raw material is a small share of a barrel of oil or of natural gas.

The OECD's Global Plastics Outlook, published in 2022 with data for 2019, estimates that world plastics production doubled from 2000 to reach 460 million tonnes in 2019. Divided over the 7.7 billion people alive then, that is 460 Mt / 7.7 billion = 60 kg a head (calculated), roughly one person's body weight every year.

Because the chains are long and the C-C bonds are strong, plastics do not rot the way leaves do. Most organisms have no enzymes to break a polyethylene chain. In 2016 Japanese researchers reported in Science a bacterium, Ideonella sakaiensis, that feeds on PET by splitting its ester links with two enzymes. It works slowly and is the exception. Polyolefins, which are plain carbon chains, are far more resistant.

6.2 The OECD's 2019 ledger shows that of 353 million tonnes of plastic waste only 9 per cent was recycled, and about a fifth escaped management altogether

The OECD reports global plastic waste of 353 million tonnes in 2019, more than double the figure for 2000. It then sorts where this waste went. About 9 per cent was recycled, 19 per cent burned in incinerators, 50 per cent buried in landfill and 22 per cent was mismanaged, meaning dumped in the open, burned in the open or left in the environment.

The 9 per cent hides a loss. Only about 15 per cent of waste was collected for recycling, and about 40 per cent of what was collected was rejected as residue, because it was dirty, mixed or the wrong grade. Multiplying, 0.15 x 0.60 = 0.09 (calculated), which matches. Recycling is therefore limited less by chemistry than by collection and sorting.

In 2019 about 6.1 million tonnes of plastic waste leaked into rivers, lakes and seas, and 1.7 million tonnes reached the oceans.

The outlook then projects forward with no new policy. Plastics use rises from 460 million tonnes in 2019 to 1,231 million in 2060, and waste from 353 to 1,014 million tonnes. Recycling reaches 17 per cent of waste, still less than a fifth, incineration and landfill stay near 20 and 50 per cent, and the mismanaged share falls only to 15 per cent. Leakage to the environment doubles to 44 million tonnes a year. Almost two-thirds of 2060 waste comes from short-lived items such as packaging, low-cost products and textiles.

Data Where 353 million tonnes of plastic waste went in 2019, and the 2060 outlook
Item20192060 without new policy
Plastics use460 Mt1,231 Mt
Plastic waste353 Mt1,014 Mt
Recycled9 per cent (about 32 Mt)17 per cent
Incinerated19 per cent (about 67 Mt)about 20 per cent
Landfilled50 per cent (about 177 Mt)about 50 per cent
Mismanaged22 per cent (about 78 Mt)15 per cent
Leakage to the environment6.1 Mt to waters, 1.7 Mt of it to oceans44 Mt a year (all environmental leakage)

Shares are of waste generated. Tonnages in brackets are calculated here from the shares. The 2060 leakage figure covers all environments, a wider measure than the 2019 aquatic figure.

Source: OECD, Plastic pollution is growing relentlessly as waste management and recycling fall short (press release for the Global Plastics Outlook, 22 February 2022), https://www.oecd.org/en/about/news/press-releases/2022/02/plastic-pollution-is-growing-relentlessly-as-waste-management-and-recycling-fall-short.html (global plastics production doubled from 2000 to 2019 to reach 460 Mt; plastic waste more than doubled to 353 Mt; only 9% recycled, 15% collected for recycling but 40% of that disposed of as residues; 19% incinerated, 50% landfill, 22% evades waste management; in 2019 6.1 Mt leaked into aquatic environments and 1.7 Mt flowed into oceans)

6.3 Recycling is hard because mixed polymers cannot be melted together, additives travel with the plastic, and each melting shortens the chains

Thermoplastics can in principle be melted and used again, the basis of mechanical recycling. In practice a problem emerges. Two different polymers are usually not compatible when melted, so a blend is weak and cloudy. A single PVC bottle in a batch of PET releases acid at the melting temperature and ruins it. Colours, labels, glues, fillers and plasticisers, all added for the first life, remain. Each time the material is heated, some chains break and the average length falls, so it is typically used for less demanding items. This is called downcycling. The chasing-arrows symbol on a product only states which polymer it is, numbered 1 for PET, 2 for HDPE, 3 for PVC, 4 for LDPE, 5 for PP, 6 for PS and 7 for others. It does not guarantee anyone will recycle it.

Condensation polymers have a useful extra route. The link that formed with loss of water can be reversed by adding water or an alcohol, which cuts PET back into its monomers, to be purified and rebuilt. This is chemical recycling. Addition polymers such as polyethylene lack such a weak link, since their backbone is carbon-carbon, so they must be heated to break them into oils and gases, a more demanding process. The Understanding Chemicals module 'Bioplastics: PLA, PHA, bio-PE and starch blends' compares the plastics made from plants, and shows that a plastic being plant-based and a plastic being biodegradable are two separate questions.

The chemistry therefore points to practical limits. A single polymer, clean and collected, recycles well; a mixed multilayer sachet does not. The site's node 'Plastic, paper and glass recyclers' lists the enterprises that do this work.

6.4 India's own plastic figures are smaller than the global average suggests, partly because reporting is incomplete, and policy now places responsibility on producers

India's Central Pollution Control Board (CPCB) collects plastic waste data from states. The figures reported by the environment ministry show about 3.36 million tonnes in 2018-19, 3.47 million in 2019-20 and 4.13 million in 2020-21. Compare this with the OECD's 46 kg a person. India had about 1.4 billion people in 2020-21, so 4.13 million tonnes works out at about 3 kg a head (calculated), roughly one-fifteenth of the global mean. The CPCB publishes totals, not a per-person figure. Indian per-capita use is genuinely lower than in rich countries, but not by that factor. Many states report no figures at all, and a large informal sector of waste pickers collects and sells plastic before it enters official counts. The gap warns that a number is only as good as its measuring method, a theme from module 1.

India's response includes a policy of extended producer responsibility for plastic packaging. Under it, producers, importers and brand owners must make sure a quantity of packaging is collected and processed. For 2022-23 the obligation stood at about 3 million tonnes, and registered processors issued certificates for about 2.5 million tonnes. The system counts tonnes processed rather than tonnes of plastic that really came back into use, so how well it works depends on audit and verification.

Data A sum on paper: reported plastic waste per person
QuantityWorkingResult
OECD, world, 2019353 Mt / 7.7 billion46 kg per person per year (calculated)
CPCB, India, 2020-214.13 Mt / 1.4 billionabout 3 kg per person per year (calculated)
Ratio46 / 3about 15 times (calculated)
Extended producer responsibility, 2022-232.5 Mt processed / 3 Mt obligationabout 83 per cent of the obligation (calculated)

Populations are round figures. The CPCB total has many state entries missing.

Source: Ministry of Environment, Forest and Climate Change, Government of India, via the Press Information Bureau (CPCB data), https://pib.gov.in/PressReleasePage.aspx?PRID=1943210 (release of 27 July 2023: plastic waste generation 3,360,043 t in 2018-19, 3,469,780 t in 2019-20 and 4,126,997 t in 2020-21 from CPCB annual reports, consolidated from state boards with some entries NA; no per-person figure is given; for 2022-23 an EPR obligation of around 3 Mt and 2.5 Mt of certificates from registered processors)

See it in the table

H₂O WaterGas Natural gasPP PolypropylenePVC PVCDOP Plasticisers

Check your understanding

In the OECD's 2019 ledger, which share of 353 million tonnes of plastic waste went to landfill?

Half went to landfill. The rest was 9 per cent recycled, 19 per cent incinerated and 22 per cent mismanaged.

Why is PET easier to turn back into monomers than polyethylene?

Condensation polymers contain weak links that the original reaction formed and that can be reversed. A carbon-carbon backbone has no such weak point.

A recycling-symbol number 5 on a tub tells you

The number names the resin: 5 is polypropylene. Whether it is recycled depends on local collection and sorting.
← Part 5: Polymers: long chains from small unitsMark read · Wrap-up →