Insulating glass unit
Two or three panes of glass sealed with a gap between them, used in windows.
Buildings and construction · No. 92
- Electrical and chemical age
Sealing argon between two glass sheets, one with a heat-reflecting coating, cuts the heat lost through the glass to about a fifth of single glass (calculated).
Chart: Illustration: Insulating glass unit
Where it comes from
Chart: Map of where it comes from
Thomas Stetson patented double glazing for sash windows in 1865. Charles Haven patented a sealed unit called Thermopane in 1934. A first commercial unit went on sale in North America in 1938 but was withdrawn a year later. Libbey-Owens-Ford introduced Thermopane in 1944 and opened a Thermopane factory in 1946.
Three things to know
- Glass is about 97% of the mass of a 20 kg per m2 double unit; the spacer, sealants, zeolite, argon and coating together weigh under 1 kg.
- Making 1 m2 of argon low-e double glazing gives off 39.2 kg CO2e; at AGC's 2026 figure for a standard 4 mm pane, the two panes would be about half of that (calculated).
- India's ECBC caps the solar heat gain (SHGC) of windows that do not face north at 0.27 outside its cold zone, while clear single glass lets in 87% of the sun's heat (solar factor 0.87).
The journey
- 1 Float glassSand, soda ash, limestone, dolomite and recycled glass melted at 1,500 to 1,600 degrees Celsius and formed into flat sheets
- 2 CoatingA thin low-emissivity layer, usually silver, reflects heat; applied to one pane in a vacuum or onto hot glass
- 3 Edge frameAn aluminium, steel or polymer spacer bar filled with zeolite desiccant holds the panes apart
- 4 Seal and fillPolyisobutylene primary seal, silicone, polysulfide or polyurethane outer seal, and about 90% argon in the gap
- 5 In the windowFitted in frames and facades, where it lasts 25 to 30 years
- 6 End of lifeDeclared as landfill in EPDs; building glass cullet is only partly returned to float glass
Try this in What if Switch on levers and see what changes in India by 2036.
Covered in Heat and thermodynamics: engines, heat pumps and their limitsEngineering