Insulating glass unit: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Composition follows one AGC declaration for a 4-16-4 low-e argon unit (data year 2016, published 2019) [1] and one Pilkington declaration for a 4/12/4/12/4 triple unit (2023) [2]. Spacer mass depends on its material [1]. Sand, soda ash and limestone sit inside the flat glass sheet node; the coated pane (low-e coated glass) is counted there too until it has a node. Float glass cullet, the tin bath, stainless steel and polyamide spacers, and packaging are named here but not linked as separate nodes.
as of 2026-11-16
Components
The products inside one unit, with quantity, mass share and cost share
Variant 1 Argon low-e double| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Flat glass sheet | Component | 2 | 97% |
| Two 4 mm panes, 20 kg of 20.6 kg per m2 (calculated); glass is about 97% of the unit's mass [1]. Sand, soda ash and lime inputs are counted in the glass node. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Flat glass sheet | Component | 3 | 97% |
| Three 4 mm panes, 30 kg of 31 kg per m2 [2]; two are offline coated glass. | |||
as of 2026-11-16
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Argon low-e double| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Adh Adhesives and sealants | Functional | 0.33 kg | 1.6% |
| About 30 g polyisobutylene primary seal plus about 300 g polysulfide, silicone or polyurethane outer seal [1] (calculated sum). | |||
| Al Aluminium | Structural | 0.2 kgrange 0.15 to 0.26 kg | 1% |
| Spacer bar of about 150 to 260 g depending on material (stainless steel, aluminium or polyamide/steel) [1]; linked to aluminium as an assumption, mid-range used here, share calculated on 20.6 kg. | |||
| Zeo Zeolites | Functional | 0.07 kg | 0.3% |
| Zeolite desiccant, about 70 g per m2 [1]. | |||
| Ar Argon | Functional | 0.026 kg | 0.1% |
| 14.4 litres, about 25.6 g per m2, at about 90% argon in the gap [1]. | |||
| Ag Silver | Functional | 0 kgrange 0 to 0 kg | 0.001% |
| Calculated: a silver layer of 8 to 12 nm [34] at a density of 10.5 g per cm3 is about 0.08 to 0.13 g per m2 per layer. The whole magnetron coating stack is about 1 g per m2 [1]. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Adh Adhesives and sealants | Functional | 0.5 kg | 1.6% |
| Polymer sealants 0.5 kg per m2 [2]. | |||
| Al Aluminium | Structural | 0.3 kg | 1% |
| Aluminium 0.3 kg per m2 in the declared composition [2]. | |||
| Zeo Zeolites | Functional | up to 0.1 kga range, no single figure | – |
| Desiccant is given only as less than 0.1 kg per m2 [2]; assumed zeolite as in the AGC unit. | |||
| Ar Argon | Functional | up to 0.1 kga range, no single figure | – |
| Argon is given only as less than 0.1 kg per m2 in two 12 mm gaps [2]. | |||
as of 2026-11-16
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Glass | Float glass is made from about 70 to 75% silica sand, 15% soda ash and 15% limestone and dolomite, plus 15 to 25% crushed recycled glass, melted at 1,500 to 1,600 degrees Celsius | Float glass | [29] |
| Coat | A low-e coating goes on one pane, either onto hot glass in the float line (pyrolytic) or on cold glass in a vacuum (sputtered) | – | [35] |
| Spacer frame | Spacer bars of aluminium, stainless steel or polymer, holding zeolite desiccant, are formed into a frame that keeps the cavity dry | – | [1][15][30] |
| Primary seal | Polyisobutylene, the most common primary seal, is applied to the spacer and pressed against the glass | – | [30][31] |
| Fill | Argon replaces air in the gap, to about 90% argon | – | [1][31] |
| Secondary seal | Polysulfide, silicone or polyurethane fills the channel between spacer and glass edges, bonds the panes and keeps moisture out | – | [30][31] |
as of 2026-11-16
Technologies used to make it
The technologies used to make it, at which step
Made with- Gl Glassmaking Melting the sand, soda ash, limestone and cullet batch The float line furnace has a melting zone of about 1,500 to 1,600 degrees Celsius [29].
- FG Float glass Forming the ribbon of flat glass that each pane is cut from The twin technology; ribbon thickness ranges from about 2 to 19 mm [29].
as of 2026-11-16
Sources
- Environmental Product Declaration: Low-e/solar control double glazing units (Thermobel, Thermobel Stopray, iplus IGU, ipasol IGU), 4-16-4 reference unit AGC Glass Europe, 2019
- Pilkington Insulight TRIPLE 4/12/4/12/4 triple IGU with 2 x offline coated glass (EPD S-P-02592) Pilkington (NSG Group), via EPD International, 2023
- Advances in glazing products part 1: anatomy and performance of conventional glazing Enclos, 2024
- A short guide to how glass is made Guardian Glass
- Expert series: insulating glass, the history, evolution and mechanics of the IGU Guardian Glass, 2020
- TechDirect white paper: understanding IGU specification Viridian Glass, 2025
- Silver (low-e sputtering target), The Supply Map PRIA Technologies (PolicyRisk supply map)
- The science of low-e coatings Vitro Architectural Glass