Material Insights · Understanding the Material World

Plastic foam insulation board: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Composition follows one EPS declaration (24 kg/m3, 2024), two XPS declarations (2019 and 2021, UL Environment), a Kingspan and an IVPU PU board declaration, and a grey Neopor EPS declaration [1][4][2][6][7][9]. Masses per m2 are calculated at 100 mm. Pentane, CO2 and HFO blowing agents have no material node here, so they are named in notes. Aluminium facings weigh 0.33 kg per m2 on one PU board [7].

as of 2026-11-17

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant 1 EPS
MaterialRoleAmount in one unitShare of the unit's mass
PS Polystyrene and EPSStructural2.25 kg94.4%
One 24 kg/m3 declaration lists 0.81 kg polystyrene in a 0.86 kg board at R = 1 (36 mm), 94.4% of the board [1]; scaled to 100 mm that is 2.25 kg (calculated). Beads carry 5% pentane by weight before expansion [1].
FR Flame retardantsFunctional0.03 kg1.1%
A polymeric flame retardant at about 1.1% of a grey Neopor board [9]; 1.1% of 2.4 kg is about 0.03 kg (calculated). The generic EPS declaration does not list it.
Gr GraphiteFunctionalup to 0.14 kga range, no single figure –
Grey EPS carries graphite at under 6% of mass [9], up to 0.14 kg per m2 (calculated). White EPS has none.
Variant 2 XPS
MaterialRoleAmount in one unitShare of the unit's massRecycled content
PS Polystyrene and EPSStructural1.9 kgrange 1.5 to 2.3 kg 70%29%
Virgin polystyrene 40 to 60% plus recycled 15 to 25% of a 2021 declaration [2], so 55 to 85% (midpoint 70%); of 2.7 kg per m2 that is 1.5 to 2.3 kg (calculated). Recycled share is 20 of 70 (calculated). An older Owens Corning declaration gives virgin 65 to 75% and recycled under 30% [4].
HFC Fluorochemicals and refrigerantsFunctionalNot given – –
Where the blowing agent is an HFC or HFO, it sits here; the declaration gives all blowing agents together at 9 to 12% [2] (5 to 15% in the older Owens Corning one [4]). Other agents are possible, so no share is assigned.
FR Flame retardantsFunctionalNot given – –
Flame retardant and other additives together are 0 to 3% of the board [2]; under 1% in the older Owens Corning declaration [4].
Variant 3 PIR
MaterialRoleAmount in one unitShare of the unit's mass
PU Polyurethanes (MDI, TDI, polyols)Structural2.8 kgrange 2.6 to 3 kg 90%
MDI 58 to 65% plus polyol 26 to 31% of the foam, so 84 to 96% (midpoint 90%) [7]. The declared 120 mm board holds 3.71 kg of foam per m2 (30.9 kg/m3, calculated), so 100 mm holds about 3.1 kg and the polyurethane 2.6 to 3.0 kg (calculated). Blowing agent is pentane, 3 to 6% of the foam [7].
FR Flame retardantsFunctional0.11 kg3.5%
Flame retardants are 2 to 5% of the foam [7]; midpoint 3.5% of 3.1 kg is about 0.11 kg (calculated).
Al AluminiumFunctionalNot given –
The 120 mm PU board declared in [7] carries 0.33 kg per m2 of multi-layer aluminium facings on both sides; the facing is a laminate and its aluminium content is not given, so no amount is entered. Glass tissue and composite foil are other facings [11][6].

Indicative · as of 2026-11-17. Amounts per m2 at 100 mm assume 24 kg/m3 (EPS), 27 kg/m3 (XPS) and about 31 kg/m3 (PIR foam, without facings); products vary. Grey EPS rows come from another declaration than white EPS, so EPS shares are not additive.

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensSource
Make the feedstockEPS beads are made with pentane (5% by weight); XPS uses polystyrene granules; PIR uses MDI and polyol with pentane[1][38][7]
Expand (EPS)Beads are pre-expanded with steam, matured, then moulded into blocks or boards[36][1]
Extrude (XPS)Granules are melted under pressure with a blowing agent and pushed through a die, where cells form[39][38]
Laminate (PIR)The mix expands between facings on a continuous line[38]
Cool and trimThe foam is cooled and cut to final size[39][38]

as of 2026-11-17

Sources

  1. NEPD-6298-5556: EPS thermal insulation for buildings, 16, 24 and 30 kg/m3 (Tempra ehf.) The Norwegian EPD Foundation, 2024
  2. Environmental product declaration: Styrofoam brand XPS products DuPont de Nemours, UL Environment programme (copy held by Polyglass), 2021
  3. EPD Owens Corning Foamular XPS Owens Corning, UL Environment programme (copy held by Sto Corp), 2019
  4. PIR insulation core with composite foil facing for pitched roofs (Kingspan Therma TP10, EPD-KIN-20230011-CBD2-EN) One Click LCA, quoting an IBU declaration by Kingspan Insulation, 2023
  5. IVPU 21-0007rev: PU thermal insulation boards with multi-layer aluminium facing IVPU Industrieverband Polyurethan-Hartschaum e.V., Institut Bauen und Umwelt e.V., 2021
  6. Insulation board made of Neopor Plus BMB (EPD) BASF SE and Karl Bachl, Institut Bauen und Umwelt e.V., 2019
  7. Kooltherm K3 / Kooltherm K10 environmental product declaration Kingspan Insulation B.V., Institut Bauen und Umwelt e.V. (via Heinze), 2023
  8. Expanded Polystyrene (EPS): How to select the right grade? SpecialChem, 2026
  9. Weighing the material options Construction Canada, 2012
  10. Expanded polystyrene or EPS: production of extruded expanded polystyrene (EPS-E or XPS) Techniques de l'Ingenieur, 2008