Smart electricity meter: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Single-phase composition follows the Gemis 2, 1.604 kg with packaging, and three-phase the Gesis 1.5, 2.025 kg, both made by Bitron for Gridspertise and declared with EPDItaly in 2024 [1][2]. Amounts leave packaging out (17.4% and 22.2%). Indian meters may differ. Not yet nodes: populated circuit boards (11.9% and 14.8%), other electronics, communication module, relay, display and lithium cell.
as of 2026-11-17
Components
The products inside one unit, with quantity, mass share and cost share
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Integrated circuit (chip) | Component | Not given | – |
| Chips sit on the circuit board: a Texas Instruments single-phase reference design uses an ADS131M04 converter and an MSP432 microcontroller, and the communication module adds more [31]. No source gives the count or mass per meter; the populated boards are 11.9% of the Gemis 2's packed weight [1]. | |||
as of 2026-11-17
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Single-phase| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| PC Polycarbonate | Structural | 0.425 kgrange 0.425 to 0.778 kg | 32.1% | 100% |
| The Gemis 2 table gives 'PC Recycled' as 26.5% of 1.604 kg, 0.425 kg (calculated), and 'Other' plastics as 22.0%, which may include more polycarbonate; high adds them (0.778 kg, calculated). The share is of the meter without its 17.4% packaging (calculated) [1]. | ||||
| St Steel | Structural | 0.027 kg | 2.1% | – |
| Steel 1.4% plus stainless steel 0.3% of 1.604 kg (calculated) [1]. | ||||
| Cu Copper | Functional | up to 0.032 kga range, no single figure | – | – |
| The declaration names no copper; its 'Other' metals are 2.0% of 1.604 kg, at most 0.032 kg (calculated) [1]. Landis+Gyr's redesign of its E360 meters saved copper, so meters of this kind contain it [19]. | ||||
| Material | Role | Amount in one unit | Share of the unit's mass | Recycled content |
|---|---|---|---|---|
| PC Polycarbonate | Structural | 1.114 kgrange 1.114 to 1.14 kg | 70.7% | 100% |
| The Gesis 1.5 table gives 'Polycarbonate 100% recycled' as 55.0% of 2.025 kg, 1.114 kg (calculated); high adds the 1.3% of other plastics. The share is of the meter without its 22.2% packaging (calculated) [2]. | ||||
| St Steel | Structural | 0.028 kg | 1.8% | – |
| Steel 0.4% plus stainless steel 1.0% of 2.025 kg (calculated) [2]. | ||||
| Cu Copper | Functional | up to 0.073 kga range, no single figure | – | – |
| 'Other' metals are 3.6% of 2.025 kg, at most 0.073 kg (calculated) [2]. | ||||
as of 2026-11-17
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Technology | Source |
|---|---|---|---|
| Assemble the circuit boards | Surface-mount (SMT) assembly of the boards for the Gemis 2 and Gesis 1.5 takes place at a Bitron plant in China; Genus runs automated SMT lines in India [1][2][24] | – | [1][2][24] |
| Mould the case | The tender asks for an opaque polycarbonate base; Gesis 1.5 parts are moulded in Poland and Genus uses robot-assisted moulding [5][2][24] | Injection moulding | [5][2][24] |
| Fit the parts | The tender asks for a remote disconnect switch, a coin-type lithium cell and a plug-in communication module [5] | – | [5] |
| Final assembly | Plastics and electronic components are put together at Bitron's plants in Poland for both declared meters [1][2] | – | [1][2] |
| Calibrate and test | Accuracy is checked with energy pulses and calibrated [31]; BIS testing covers the data protocol and communicability, and RF modules are retested when the module model or supplier changes [6] | – | [31][6] |
as of 2026-11-17
Technologies used to make it
The technologies used to make it, at which step
Made with- IM Injection moulding Case and cover moulding Genus describes robot-assisted moulding in its factories [24]; the base is polycarbonate [5].
as of 2026-11-17
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies- IC Integrated circuit A metering converter, a microcontroller and a communication chip sit on the board [31]; circuit boards and semiconductors are the core of a smart meter [13].
- Cell Cellular mobile network 1 plug-in communication module The tender asks for a 4G module on a plug-in network interface card [5]; Genus offers field-replaceable cellular (4G, NB-IoT) and RF-mesh modules [23].
as of 2026-11-17
Sources
- Environmental Product Declaration: Gemis 2 (mono-phase smart meter) EPDItaly (EPD owner Bitron Electronic China Company Ltd; meter made by Bitron Electronics for Gridspertise), 2024
- Environmental Product Declaration: Smart Meter multi-phase Gesis 1.5 EPDItaly (EPD owner Bitron Poland; made for Gridspertise), 2024
- Phase 5-30A meter GTP for TP Odisha Discoms (single-phase smart meter specification) TP Central Odisha Distribution Ltd
- STI for implementation of IS 16444 (Part 1):2015 (scheme of testing and inspection) Bureau of Indian Standards, 2018
- India's smart meter rollout faces delay IntelliNews, 2025
- Smarter design saves tons of materials Landis+Gyr
- Smart meters are evolving from standalone devices into core digital infrastructure: Genus Power T&D India, 2026
- Genus Power Surpasses 1 Crore Smart Meter Milestone as India's Smart Metering Mission Enters High-Scale Execution Phase pv magazine India (Genus Power press release), 2026
- One-Phase Shunt Electricity Meter Reference Design Using Standalone ADCs (TIDUEM7A) Texas Instruments, 2021