Wind turbine generating set: Bill of materials
About these figures
Which unit, study and year the composition figures describe, and how they vary
Figures are per turbine from two Vestas life cycle studies: the V163-4.5 MW onshore (2025), plant totals divided by 22 turbines, and the V236-15 MW offshore (2024), divided by 66 [1][2]. Steel and iron are 84.3% and 82.9% of mass. The totals include the generator, transformer and converter, so those are not linked as components. The onshore model has no rare earth magnets. Composites, polymers and electronics have no node; blades, towers and gearboxes are not yet nodes.
as of 2026-11-13
Components
The products inside one unit, with quantity, mass share and cost share
Variant Offshore (V236-15 MW reference)| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| Permanent magnet | Component | 909 kg | 0.06% |
| Magnets of the turbines in the 66-turbine plant (60 t) divided by 66, calculated; Table 6 lists magnets on their own line, apart from steel and copper, so they are not counted twice [2]. Adamas Intelligence puts the 15 MW class at roughly 3 tonnes per turbine, a market analyst's rough figure that the Vestas inventory does not support [14]. Mass share calculated against the 1,622 t turbine. | |||
as of 2026-11-13
Direct materials
The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content
Variant 1 Onshore (V163-4.5 MW reference)| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 413,270 kg | 84.3% |
| Steel and iron of the turbines in a 22-turbine plant (9,092 t) divided by 22, calculated; includes cast iron, towers, the generator and the transformer [1]. | |||
| Al Aluminium | Structural | 4590 kg | 0.9% |
| Aluminium and alloys of the turbines (101 t) divided by 22, calculated [1]. | |||
| Cu Copper | Functional | 2455 kg | 0.5% |
| Copper of the turbines in the 22-turbine plant (54 t) divided by 22, calculated; windings, cables and busbars, including those of the generator and transformer [1]. | |||
| Material | Role | Amount in one unit | Share of the unit's mass |
|---|---|---|---|
| St Steel | Structural | 1.34 million kg | 82.8% |
| Steel and iron materials of the turbines (88,668 t for 66 turbines) divided by 66, calculated; includes the generator and transformer; the report's own turbine-only figure is 82.9% of mass [2]. | |||
| Cu Copper | Functional | 16,270 kg | 1% |
| Copper of the turbines (1,074 t) divided by 66, calculated [2]. | |||
| Al Aluminium | Structural | 13,560 kg | 0.8% |
| Aluminium and alloys of the turbines (895 t) divided by 66, calculated [2]. | |||
as of 2026-11-13
Cost breakdown
The share of the unit's cost in each component or stage
| Part | Share of cost | Variant | Year | Source |
|---|---|---|---|---|
| Tower, nacelle and blades together (the large metal components), share of a typical turbine's cost | 80% | – | 2012 | [27] An old figure; no recent split by part was found. |
| Turbines as a share of the capital cost of an onshore wind farm | 65% | Onshore | 2012 | [27] |
as of 2026-11-13
How it is put together
The main steps from parts and materials to the finished unit
| Step | What happens | Source |
|---|---|---|
| Make the blades | Glass fibre (and in some designs carbon fibre) is laid in moulds with resin to form the blade shells; epoxy-infused blades are in the Vestas designs assessed. | [1] |
| Make the tower and hub parts | Rolled steel is formed into tower sections; castings form the hub and the nacelle frame (cast iron). | [1] |
| Build the nacelle | The generator, converter, transformer, yaw system and (in geared designs) the gearbox are fitted in the nacelle housing and tested. | – |
| Pre-assemble and ship | Offshore, parts are pre-assembled at a port (Esbjerg in the Siemens Gamesa case) 50 km from the wind farm by default, then shipped to site. | [15] |
| Erect and commission | Tower sections, nacelle and rotor are lifted onto the foundation, connected to the grid and commissioned. | – |
as of 2026-11-13
Technologies inside it
The technologies inside the product, with how much of each per unit
Embodies 4- Gen Generators and alternators 1 generator Every turbine drives a generator that works by electromagnetic induction.
- PE Transformers and power electronics 1 converter and transformer set Converter and transformer match the generator to the grid [15].
- Ger Gear train A gearbox raises the rotor speed in geared designs, which held 91.3% of the world market in 2024 [7]; both reference turbines are geared.
- Nd Neodymium magnets 909 kg Offshore (V236-15 MW reference) About 909 kg of magnets per V236-15 MW turbine, calculated from 60 t for 66 turbines [2]; the study says the magnets are free of heavy rare earths [2].
as of 2026-11-13
Sources
- Life Cycle Assessment of electricity production from an onshore V163-4.5 MW wind plant (version 1.2, 15 January 2025) Vestas Wind Systems A/S, 2025
- Life Cycle Assessment of Electricity Production from an offshore V236-15 MW Wind Plant (April 2024) Vestas Wind Systems A/S, 2024
- Wind Turbine Suppliers deliver new record volume Global Wind Energy Council, 2025
- 15 MW magnet-class turbines are scaling in Europe, Japan as US erases 7.2 GW of offshore wind Adamas Intelligence, 2026
- Electricity from a European offshore wind farm using SG 14-222 wind turbines (EPD S-P-09791) EPD International AB (declaration by Siemens Gamesa Renewable Energy), 2023
- Breaking down the costs of wind turbine components (Ken Paulman, Energy News Network section) Canary Media, 2012