Material Insights · Understanding the Material World

Wind turbine generating set: Working

What it is

The product and the job it does, in a short paragraph

A wind turbine generating set turns the kinetic energy of moving air into electricity. This node covers one complete turbine: three-bladed rotor, nacelle holding the generator, converter and transformer, and the tower, classed as a wind-powered electric generating set (HS 8502.31). The functional unit is one wind turbine. Foundations, cables and substations are left to the wind farm. Two variants differ most: Onshore (4.5 MW reference [1]) and Offshore (15 MW reference [2]).

as of 2026-11-13

How it works

How it does its job, step by step in plain words

Each blade works like a wing: wind flowing over it creates lift that turns the rotor, which spins a shaft at the top of the tower. Most turbines pass the shaft through a gearbox to a faster generator; geared drives held 91.3% of the world market in 2024 [7]. The alternative is a direct-drive generator with permanent magnets, which skips the gearbox but carries far more magnet material [4]. The generator's output goes through a power converter and a transformer, which match the voltage and frequency of the grid. Motors turn the nacelle into the wind and twist the blades to shed load. The Betz limit says no rotor can take more than about 59% of the wind's power [26].

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Rated power of the reference turbine (Vestas V163-4.5 MW)4.5MWOnshore2025[1]
Rotor diameter of the reference turbine163mOnshore2025[1]
Hub height of the reference turbine98mOnshore2025[1]
Mass of the reference turbine (calculated: 10,789 t for 22 turbines)490tOnshore2025[1]
Rated power of the reference turbine (Vestas V236-15 MW)15MWOffshore2024[2]
Rotor diameter of the reference turbine236mOffshore2024[2]
Hub height of the reference turbine143mOffshore2024[2]
Mass of the reference turbine1622tOffshore2024[2]
Average rated power of new onshore turbines installed worldwide (above 5 MW; all-turbine average almost 5.5 MW)5MWOnshore2024[7]
Average rated power of new offshore turbines installed worldwide9.815MWOffshore2024[7]

as of 2026-11-13

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specShareYearSource
OnshoreTower on a land foundation; reference 4.5 MW, 163 m rotor, 490 t; the reference model has no rare earth magnets in its generator94.12025Share of the 165 GW connected in 2025 (155.3 GW onshore), calculated; no unit count by variant found [5]
OffshoreTower on a seabed foundation or float; reference 15 MW, 236 m rotor, 1,622 t; magnets in the generator, about 0.9 t per turbine (calculated from the study's 60 t for 66 turbines)5.62025Share of the 165 GW connected in 2025 (9.3 GW offshore), calculated [5]; magnets from [2]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
A rotor cannot take more than 16/27 of the power in the wind passing through it (Betz limit); no measured figure for today's turbines foundPhysical59.26– % of wind power[26]
Largest single-unit turbine installed: 26 MW offshore with a 310 m rotor (a maker's claim); mainstream reference is 15 MWEngineering– 26MW[13]
Capacity factor of the average turbine fleet's new projects, set by wind resource and design (onshore, 2024)Engineering– 34%[9]
Capacity factor of offshore wind (2024)Engineering– 42%[9]
Recyclability of the designed turbine, as built (limit is 100%); after real recycling treatment 85.3 to 94.6%Engineering10098.5% of mass (V163-4.5)[1]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on Limited by
  • Newton's laws of motion Taking energy from the wind slows it, which caps the share a rotor can capture at about 59% (Betz limit) [26].

as of 2026-11-13

Sources

  1. Life Cycle Assessment of electricity production from an onshore V163-4.5 MW wind plant (version 1.2, 15 January 2025) Vestas Wind Systems A/S, 2025
  2. Life Cycle Assessment of Electricity Production from an offshore V236-15 MW Wind Plant (April 2024) Vestas Wind Systems A/S, 2024
  3. Raw materials demand for wind and solar PV technologies in the transition towards a decarbonised energy system (Carrara et al., EUR 30095 EN), Table 4 European Commission Joint Research Centre, 2020
  4. Global wind installations rise record 40% as industry charts way out of energy crisis Global Wind Energy Council, 2026
  5. Wind Turbine Suppliers deliver new record volume Global Wind Energy Council, 2025
  6. Renewable Power Generation Costs in 2024: Summary IRENA, 2025
  7. Offshore Wind Turbines in 2025: China Continues Leading in Single-Unit Capacity, Vestas's 15 MW Turbine Installed at Offshore Wind Farms offshoreWIND.biz, 2026
  8. Outer space: Blowin' in the wind (John D. Barrow) Plus Maths, 2007