Material Insights · Understanding the Material World

Feedback control theory: Technologies

Technologies

The technologies that rely on it, and how each one uses it

Relied on by 29
  • ABS Anti-lock braking ABS is a closed loop: it measures wheel speed, compares it with what the vehicle's speed allows and corrects brake pressure again and again.
  • AV Autonomous driving Steering and speed controllers compare where the car is with where it should be and correct the error continuously.
  • AP Autopilot The autopilot measures the error from the wanted course and feeds back a correction, mixing proportional, derivative and integral action as Minorsky recommended for automatic ship steering [1].
  • CNC Numerical control machining Each axis is a servomechanism: the controller compares the commanded position with the measured one and drives the motor to close the gap.
  • Rbt Industrial robot Every joint is a servomechanism that measures its angle and corrects its motor to follow the planned path.
  • Cob Collaborative robots A computer steers the cobot's wheels or joints in a loop, reacting to the forces that the worker or an obstacle applies.
  • Hmn General-purpose humanoid robots Walking on two legs needs constant measurement and correction of balance.
  • RbS Robot-assisted surgery The arms work like servomechanisms, motors kept on target by feedback, a theory that Hazen summarised in 1934 [1].
  • PLC Programmable logic controller Besides logic, PLCs run closed-loop control algorithms such as PID.
  • FBW Fly-by-wire flight control The computers compare the aircraft's motion with the pilot's command and keep correcting the difference.
Show 19 more
  • eVT Electric vertical take-off aircraft A multirotor is unstable on its own, so a flight computer measures its attitude and adjusts each motor's speed many times a second to keep it level.
  • RB Reusable orbital booster Landing a falling stage upright needs constant measurement and correction by onboard computers, a closed feedback loop.
  • IOS In-orbit servicing and refuelling The final approach and capture run on feedback: sensors measure the gap and computers correct the thrust again and again.
  • HSR High-speed rail Automatic train control compares the train's speed with the safe speed for the line ahead and brakes it when it is too fast.
  • TL Traffic signals Actuated signals sense waiting traffic with detectors and change their timing in response, a feedback loop.
  • PA Precision agriculture Auto-steer compares the machine's position with the planned line and keeps correcting the steering to cut skips and overlaps.
  • V2G Demand response and vehicle-to-grid Demand response is a feedback loop: grid frequency or price is measured and loads are adjusted to correct it.
  • Qtz Quartz clock The oscillator circuit feeds the crystal's own signal back to it, which keeps it vibrating at its natural frequency.
  • UCV Uncrewed combat aircraft An autopilot keeps the aircraft stable by sensing and correcting its motion.
  • LM Loitering munition An autopilot keeps the craft stable by sensing and correcting its motion.
  • Cru Cruise missile An autopilot senses errors and corrects them in flight to keep the craft on course.
  • Hom Homing guided missile Homing means steering by constantly correcting the gap between the missile and its target.
  • PGM Precision-guided bomb A guided weapon keeps measuring how far it is off course and steering to shrink the error.
  • Tpd Self-propelled torpedo Keeping a set depth and course means sensing an error and correcting it.
  • Industrial robot Each joint measures its angle and the controller corrects its motor until the tool follows the planned path.
  • Lift (elevator) The controller regulates speed and stops the car level with the floor.
  • Machine tool Each axis measures its position and the controller corrects the motor until the tool is where the program says.
  • Solar inverter Trackers and grid-following control adjust the output continuously from measured voltage and current.
  • Variable speed drive The controller compares measured current and speed with the set point and corrects the output.

as of 2026-11-12

Sources

  1. A History of Automatic Control C. C. Bissell (chapter in a Springer handbook, ISBN 978-3-540-78830-0; Lund University course copy)