Hydraulic setting of lime and cement: Technologies
Technologies
The technologies that rely on it, and how each one uses it
Relied on by 7- RC Hydraulic concrete (pozzolanic) Lime reacts with the silica and alumina in volcanic ash and water to form minerals that set even under water [1].
- PC Portland cement Burned limestone and clay give calcium silicates that harden by reacting with water [1]; world output was about 3.8 billion tonnes in 2025 [5].
- RCo Reinforced concrete Cement sets by reacting with water into a hard binder that grips the steel bars.
- PSC Prestressed concrete The hardened cement paste carries the squeeze from the tensioned steel, so its setting and slow later shrinkage matter.
- 3DC 3D-printed construction The printed mortar must start to set by reacting with water quickly enough for each layer to carry the next.
- PB Gypsum plasterboard Plaster sets in a related way: the dry powder takes back water and grows a mesh of crystals, though the result softens if kept wet.
- Precast concrete products Cement reacts with water and hardens, in the mould and then for years.
as of 2026-11-12
Sources
- Hydraulic Cement: Lost and Found (Tim Palucka, MRS Bulletin historical note) Springer Nature (Materials Research Society), 2001, September 2001, pp. 726 to 727
- Mineral Commodity Summaries 2026: Cement US Geological Survey, 2026