Gas turbines and combined cycle: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 5- Ni Nickel criticality medium The hottest blades and vanes are cast from nickel-based superalloys; nickel is on the US critical minerals list [10].
- Re Rhenium criticality high In the United States about 80% of rhenium goes into superalloys for high-temperature turbine engine parts [7].
- Co Cobalt criticality high Cobalt is an alloying metal in superalloys and some vane alloys, and is on the US critical minerals list [10].
- Y Yttrium criticality medium Yttria-stabilised zirconia is the usual ceramic thermal barrier coating on hot blades; yttrium is on the US critical minerals list [10].
- St Steel criticality low Casings, shafts and the heat recovery boiler are steel.
- Gas Natural gas criticality low The main fuel; turbines can also burn oil and, increasingly, hydrogen blends.
as of 2026-11-10. No source opened gives amounts per kW. Criticality is a judgement from supply concentration [7] and the US 2025 critical minerals list, which names nickel, rhenium, cobalt and yttrium [10].
Critical materials
The materials whose supply could hold it back
- Rhenium: superalloys take about 80% of US use, and the world produced only about 81,000 kg in 2025 [7].
- Rhenium comes only as a by-product of roasting molybdenum concentrates from copper-molybdenum ores, so its output cannot rise quickly [7].
- Chile produced about 30,000 kg, over a third of the world's rhenium, in 2025 (calculated) [7].
- Rhenium was added to the US list of critical minerals in 2025 [10].
as of 2026-11-10
Sources
- Mineral Commodity Summaries 2026: Rhenium US Geological Survey, 2026
- Interior Department releases final 2025 List of Critical Minerals US Geological Survey, 2025