Gas turbines and combined cycle: Overview
What it does
The job the technology does for people, in a short paragraph
A gas turbine burns fuel, usually natural gas, in a stream of compressed air and lets the hot gas spin a turbine that drives a generator. Adding a steam cycle that uses the hot exhaust makes a combined-cycle plant, the most efficient way to make power from fuel. The first one entered commercial service in 1939 [2], and gas supplied 21% of the world's electricity in 2025 [5].
as of 2026-11-10
How it works
The working principle in plain words, step by step
Air enters at the front and a compressor of many bladed stages squeezes it to many times atmospheric pressure. In the combustor fuel is sprayed in and burns, so the gas becomes very hot while its pressure stays high. The hot gas then expands through turbine stages, pushing their blades round. A large part of the turbine's work goes back to drive the compressor on the same shaft; the rest turns the generator. The exhaust still leaves very hot. In a combined-cycle plant a heat recovery boiler uses that exhaust to raise steam, which drives a steam turbine and adds more power with no extra fuel.
as of 2026-11-10
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Record combined-cycle efficiency, gross (Nishi-Nagoya Block 1, Japan) | 63.08 | % | 2018 | [3] |
| Simple-cycle efficiency of a large J-class turbine (M501JAC, lower heating value) | 44 | % | 2026 | [4] |
| Simple-cycle output of one large J-class turbine (M501JAC) | 453 | MW | 2026 | [4] |
| Share of world electricity from natural gas | 21 | % | 2025 | [5] |
| Efficiency of the first utility gas turbine (Neuchâtel) | 17.4 | % | 1939 | [2] |
as of 2026-11-10
Where it is used
The main places and products the technology is found in
- Combined-cycle power plants for base and mid-merit power
- Open-cycle peaking plants that start quickly when demand is high
- Combined heat and power at factories and refineries
- Compressor drives on gas pipelines and LNG plants
- Offshore oil and gas platforms
as of 2026-11-10
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- nearly 500 units ordered in 2024, the most since 2002 [6]
- Users
- gas-fired plants made 21% of world electricity in 2025 [5]
- Unit
- gas turbine units ordered
- Year
- 2024
- Note
- The unit count is of orders reported to an industry market survey, not deliveries; most gas-fired electricity comes from gas turbines, the rest from engines and steam boilers.
as of 2026-11-10
Sources
- #135 Neuchâtel Gas Turbine (landmark) ASME
- GE HA Turbine Snags Another World Record for CCGT Efficiency POWER Magazine, 2018
- M501J series gas turbine specifications Mitsubishi Power, 2026
- Global Energy Review 2026: Electricity supply IEA, 2026
- Gas Turbine Market Report: 2024 Posts Highest Units, MWs in 22 Years Turbomachinery International, 2025