HVDC links: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 4- Cu Copper criticality medium Copper is widely used for underground and subsea cables, where weight matters less [6]; copper prices have risen [5].
- Al Aluminium criticality low Overhead lines use aluminium for its low weight [6].
- Si Silicon criticality low Converter valves have been power semiconductor thyristors since 1970 [2]; the first practical thyristor, General Electric's silicon controlled rectifier of 1957, was made of silicon [9].
- Hg Mercury criticality low The first commercial converters, at Gotland in 1954, used mercury-arc valves [2]; thyristors have since replaced them.
as of 2026-11-12. No source opened gives amounts per km or per MW. Criticality is a judgement: copper is marked medium because of rising prices and long cable lead times [5].
Critical materials
The materials whose supply could hold it back
- Direct current cables: lead times now exceed five years [5].
- Cables in general: prices have nearly doubled since 2019, the IEA reported in 2025 [5].
- Copper: the IEA sees wider use of HVDC as one way to cut combined copper and aluminium demand for grids by about 4 Mt, or 15%, in 2040 in its sustainable development scenario [6].
as of 2026-11-12
Sources
- Milestones:Gotland High Voltage Direct Current Link, 1954 IEEE, Engineering and Technology History Wiki (ETHW)
- Building the Future Transmission Grid: executive summary IEA, 2025
- The Role of Critical Minerals in Clean Energy Transitions: Mineral requirements for clean energy transitions International Energy Agency
- Thyristors IEEE Technology Navigator