Open-hearth steelmaking: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Processes- Fe Iron ore criticality low The charge is molten blast-furnace iron, made from ore, plus some iron ore added to supply oxygen [1].
- St Steel criticality low The charge could be all molten pig iron, all cold scrap or any mix of the two, so steel scrap could be melted again [2].
- CaO Lime criticality low Limestone and dolomite are charged as fluxes that take up impurities as slag [1].
- CO2 Carbon dioxide criticality low Burning out the carbon in the iron gives carbon monoxide [3], which burns to carbon dioxide along with the fuel gas.
as of 2026-11-12. No source gives amounts per tonne of open-hearth steel; criticality is the checker's and writer's judgement: the inputs are bulk materials in wide supply.
Critical materials
The materials whose supply could hold it back
- No material holds the open hearth back today: the process has almost gone, replaced by oxygen and electric furnaces [1][2].
- Scrap and pig iron: because the furnace takes any mix of the two [2], its makers could switch between them as prices changed, which made supply risks small.
as of 2026-11-12
Sources
- open-hearth process Encyclopaedia Britannica
- Bessemer steel Encyclopaedia Britannica
- Wikipedia: Open-hearth furnace