Open-hearth steelmaking: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Burns fuel gas with air, both preheated to about 800 °C by the exhaust [2][3]
- Conversion
- Chemical energy of the fuel to heat in the flame; brick regenerators return part of the exhaust heat to the incoming air and gas [3]
- Note
- In 1857 Siemens claimed his regenerator recovered enough heat to save 70 to 80% of the fuel [3]; no source gives a modern energy figure per tonne of open-hearth steel.
as of 2026-11-12
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Recovers- Ht Heat The regenerative furnace captures the heat of the waste gases to preheat the air and fuel gas [6].
as of 2026-11-12
Sources
- Bessemer steel Encyclopaedia Britannica
- Wikipedia: Open-hearth furnace
- The Siemens Family EBSCO Research Starters (Paul F. Erwin), 2024