Material Insights · Understanding the Material World

Open-hearth steelmaking: Science

Principles

The science it rests on, with why each principle matters to it

Relies on

as of 2026-11-12

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1777Antoine LavoisierCombustion explained as combining with oxygen, replacing the phlogiston theory [10]
1786Louis Bernard Guyton de Morveau; independently Gaspard Monge, Alexandre Vandermonde and Claude BertholletShowed that cast iron, wrought iron and steel differ only in their carbon content [12]
1875Sidney Gilchrist ThomasWorked out how phosphorus could be removed from iron, which led to basic linings for Bessemer and open-hearth steel [11]

as of 2026-11-12

The science explained

The science behind it explained for a curious reader

Picture two brick chambers, one at each end of the furnace. Hot exhaust gas leaves through the left chamber and heats its bricks. After a while the flow is switched: cold air and fuel gas now come in through the hot left chamber, pick up the stored heat and burn with a much hotter flame, while the exhaust heats the right chamber. Switching back and forth keeps both chambers working [3]. The Siemens brothers patented the idea in 1856 and 1861 [8]. Preheated air raises the flame temperature [1], and it was this gain that made it possible to keep steel molten on an open hearth, where oxygen slowly burns out carbon [3].

as of 2026-11-12

Sources

  1. open-hearth process Encyclopaedia Britannica
  2. Wikipedia: Open-hearth furnace
  3. Open Hearth Furnace Global InCH, Encyclopedia of Intangible Cultural Heritage, 2018
  4. The Chemical Revolution: Antoine-Laurent Lavoisier (International Historic Chemical Landmark booklet) American Chemical Society, 1999
  5. Thomas, Sidney Gilchrist Complete Dictionary of Scientific Biography (Harold Dorn), via Encyclopedia.com
  6. Guyton de Morveau, Louis Bernard Complete Dictionary of Scientific Biography (W. A. Smeaton), via Encyclopedia.com